owners manual Nissan Micra

all ratings: 0 average rating: 5

Black plate (278,1) 4. Loosen the oil filter with an oil filter wrench. Depending on the engine model, a special cap type wrench may be required. See a NISSAN dealer for more information. 5. Remove the oil filter by turning it by hand. 6. Wipe the engine oil filter mounting surface with a clean cloth. Besuretoremoveanyoldgasketremainingonthe mounting surface. 7. Apply the new engine oil to the gasket of the new oil filter. 8. Screwintheoil filter until a slight resistance is felt, and then tighten an additional 2/3 of turn to secure the oil filter. Oil filter tightening torque: 15 to 20 N·m (11 to 14 ft-lb) 9. Refill the engine oil. (See “Engine oil replacement (HR12DDR, HR12DE and HR15DE engine mod- els)” (P.8-12).) 10. Start the engine and check for leakage around the SDI2578 JVM0001X oil filter. Correct as required. HR12DEengine model HR15DEengine model 11. Turn the engine off and wait several minutes. 1. Oil filler cap 12. Check the engine oil level according to the proper 2. Oil drain plug procedure. (See “Checking engine oil level” (P.8- 3. Oil filter 11).) 1. Park the vehicle on a level surface and apply the parking brake. 2. Turn the engine off. 3. Drain the engine oil according to the proper procedure. (See “Engine oil replacement (HR12DDR, HR12DE and HR15DE engine mod- els)” (P.8-12).) 8-14 Maintenanceand do-it-yourself Condition: [ Edit: 2013/ 2/ 25Model: K13-A ]

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders