owners manual Skoda Octavia

all ratings: 0 average rating: 5

20A5Facelift.book Page 251 Saturday, September 6, 2008 2:13 PM Breakdown assistance251 Raise vehicle WARNING You have to raise the vehicle with a lifting jack in order to be able to • Always raise the vehicle with the doors closed - risk of injury! take off the wheel. • Take suitable measures to prevent the base of the lifting jack from slip- ping off - risk of injury! • Not positioning the lifting jack at the specified points can result in damage to the vehicle. The jack can also sl ip off if it does not have sufficient grip - risk of injury! • It is important to support the vehicle with suitable supporting blocks if you wish to work under the lifted vehicle - risk of injury! Fig. 228 Changing a wheel: Securing wheels against being stolen* Points for positioning car jackYou need a special adapter for slackening the safety wheel bolts. Position the lifting jack by selecting the jacking point which is closest to the wheel to be removed ⇒fig.228. The jacking point is located directly below the engraving in the lower sill. The engraving is only visible after opening the door. – Position the lifting jack below the jacking point and move it up until its claw is positioned directly below the vertical web of the lower sill. A – Align the car jack so that its claw grasps the web of the lower sill A and the base plate B is resting flat on the floor. Fig. 229 Safety wheel bolt A with adapter – Turn the lifting jack up further until the wheel is just clear of the ground. – Pull off the full wheel trim/cap from the wheel hub or cap from the Ground below the lifting jack which is soft and slippery can cause the vehicle to safety wheel bolt. slip off the jack. It is therefore always necessary to place the lifting jack on a solid B – Insert the adapter with its toothed side fully into the inner toothing A surface or use a wide and stable base. Use a non-slip base (e.g. a rubber foot mat) of the safety wheel bolt A right down in such a way that only the A if the surface is smooth, such as cobbled stones, a tiled floor, etc.outer hexagon is jutting out ⇒ fig. 229. – Insert the wheel wrench fully onto the adapter B . A – Slacken the wheel bolt, or tighten it firmly⇒ page 250. Using the systemSafety Driving Tips General MaintenanceBreakdown assistanceTechnical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders