owners manual Skoda Octavia

all ratings: 0 average rating: 5

20A5Facelift.book Page 253 Saturday, September 6, 2008 2:13 PM Breakdown assistance253 Start engine – Interrupt the attempt at starting an engine after 10 seconds if it does not start right away and wait for about 30 seconds before repeating the attempt. – Disconnect the cables on the engine in exactly the reverse order they were connected up. WARNING Fig. 230 Jump-starting using • The non-insulated parts of the terminal clamps must never make contact the battery from another with each other. Furthermore, the cable connected to the positive terminal vehicle: A - flat vehicle battery, B - battery providing of the battery must not come into contact with electrically conducting parts current of the vehicle - risk of a short circuit! • Do not affix the jump starting cables to the negative terminal of the It is important to connect the jump-start cables in the correct order.discharged battery. There is the risk of detonating gas seeping out the battery being ignited by the strong spark which results from the engine Connecting positive terminals being started. – Attach one end 1 to the positive terminal ⇒ fig. 230 of the • Run the jump-start cables so that they cannot be caught by any rotating A parts in the engine compartment. discharged battery A . A • Do not bend over the batteries - risk of caustic burns! – Attach the other end 2 to the positive terminal of the battery A • The vent screws of the battery cells must be tightened firmly. supplying the power B . A • Keep any sources of ignition (naked flame, smouldering cigarettes etc.) Connecting negative terminal and engine block away from the battery - risk of an explosion! – Attach one end 3 to the negative terminal of the battery supplying A the power B . A Tow-starting and towing vehicle 4 A – Attach the other end to a solid metal part which is connected firmly to the engine block, or to the engine block itself.General Starting engine Please pay attention to the following instructions if you are going to use a – Start the engine of the vehicle providing current and run the engine at tow rope: idling speed. Driver of the towing vehicle – Now start the engine of the vehicle with the discharged battery.– Do not drive off until the tow rope is taught. Using the system Safety Driving Tips General Maintenance Breakdown assistanceTechnical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders