język polski english language Deutsch español français

or

owners manual Alfa Romeo 33

owners manual Alfa Romeo 33 - year of production: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 - Alfa Romeo 33 owners manual EN

Document: pdf (12.9 MB) 378 pages
all ratings: 0 average rating: 5
text version of content this owner's manual page from owners manual to the vehicle Alfa Romeo 33, year of production 1983 - 1995:
REAR SUSPENSION 6. From luggage compartment re- b. Insert springs coaxially to the lease and remove lock nut and nut of shock absorbers and make sure upper shock absorber fastener, the caps and upper spring support remove cap and anti-shock rubber gaskets are properly assembled bumper. and positioned. 1 Bolt 3 Tie rod 2 Bolt 4. Screw out rigid tube connection of brake hydraulic system and extract flexible hose from support square. Apply a cap to rigid tube. 7. Release and remove nuts and washers of lower shock absorber fastener, then lower hydraulic hoist, remove springs from axle and shock c. Set up car in nominal position, absorbers. corresponding to static load 8. Separate fromschock absorber (see: Group 00 Maintenance of Mechanical Components and rubber bumper, cap, and attaching Body) and set the bolts securing fork, after removing the relevant fastening screw. tie rods andPanhard bar to body to the prescribed torque. CHECKS AND INSPECTIONS @ : Tightening torques 1. Check shock absorber efficiency Bolts securing tie rods to body and replace it, if oil leaks are found. 33.35 + 38.26N-m 2. If necessary, verify shock ab- 1 Rigid tube 3 Flexible tube (3.4 + 3.9 kg-m sorber calibration data(see: Service 2 Square Data and Specifications- inspection 25.28 + 28.2ft.lb) and Adjustment); replace shock 5. Place column hoist provided absorbers, if required. Bolts securing Pahnard bar to with A.2.0070 support under the body 3. Check wear status, damages and axle and lift it to release shock 68.67 + 86.35N- m deformations of rubber components. absorbers from end-of-stroke. (7 + 8.7 kg-m Replace them, if required. 50.63 + 62.93f-t-lb) INSTALLATION d. Restore rear brake oil delivery Assemble shock absorbers on car in tube connection and perform the inversed order with respect to brake system air bleeding (see: removal and remember the following indications: Group 22- Front and Rea r Brakes - Brake Air Bleeding). a. Assemble shock absorber com- ponents and secure their upper part to thebody . May 1983 25-6
PDF Download PDF

Click here to download a pdf file with an instruction manual for Alfa Romeo 33
year of production from: 1983



cars manual pdfDo you prefer pdf format?
Find out how to download
Enter the code to download PDF file:



All pages in one PDF file!

How to get the code?

It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.


:

secure paypal
How many PDF files you want to download:



Alfa Romeo 33 owners manual
pages 234 - 240
234
Alfa-Romeo-33-owners-manual page 234 min
235
Alfa-Romeo-33-owners-manual page 235 min
236
Alfa-Romeo-33-owners-manual page 236 min
237
Alfa-Romeo-33-owners-manual page 237 min
238
Alfa-Romeo-33-owners-manual page 238 min
239
Alfa-Romeo-33-owners-manual page 239 min
240
Alfa-Romeo-33-owners-manual page 240 min

Alfa Romeo 33 owners manual
page 237 / 378

first page -10 pages prev page next page +10 pages last page
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Alfa Romeo 33 owners manual / page 237
first page -10 pages prev page next page +10 pages last page


PDF Download PDF