owners manual Saab 9-5

all ratings: 0 average rating: 5

Car care and technical information233 Waxing and polishing Touching up the paint If corrosion has already set in, e.g. as a Do not wax a new car during the first three Damaged paintwork should be treated as result of stone-chip damage, use a pointed or four months. In fact, there is no need to soon as it is discovered: the longer it is left, knife to scrape off all surface rust. If possi- polish the car before the paintwork has the greater the risk of corrosion. The ble, the damaged area should be taken started to go dull through oxidation. Other anti-perforation warranty does not cover back to the bare metal. The metal should than in exceptional cases, do not use abra-corrosion resulting from untreated defects.then be primed with two thin coats of primer sive polishes containing a cutting agent on applied by brush. a new car. Always wash the car thoroughly Paintwork damage sustained in a collision is After the primer has dried, apply several thin before waxing or polishing.usually extensive and can only be properly layers of topcoat enamel until the surface of restored by professionals.the repaired area is flush with the surround- Engine compartment However, you can repair small scratches ing paintwork. Clean the engine compartment using an and stone-chip damage yourself. The nec-Stir both primer and touch-up enamel thor- engine detergent and rinse with hot water. essary tools and materials, such as primer, oughly before use and allow each coat to Cover the headlights. If using a high-pres-touch-up paint and brushes, are available dry before applying the next. sure washer do not aim the spray nozzle on from your Saab dealer. the: In the case of minor flaws in the paintwork, where the metal has not been exposed and •Radiator. an undamaged layer of paint remains, • Throttle cable. touch-up paint can usually be applied • Throttle housing. directly, after any dirt has been scraped • Other engine controls. away using a pointed knife. • The alternator. • Ignition system and other electrical com- ponents. Additional care should be taken if using a high-pressure washer. Hold the nozzle at right angles to the area to be cleaned, which is particularly important when spraying labels. Do not use gasoline as a cleaning agent or solvent when carrying out repairs or mainte- nance. Saab recommends the use of envi- ronmentally safe degreasing agents.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders