owners manual Saab 9-5

all ratings: 0 average rating: 5

Car care and technical information231 Safety belts Upholstery and trim Cleaning and caring for leather To remove fluff or hairs from the seat uphol-upholstery WARNING stery or headlining, use a moist, lint-free The principal reason for treating leather cloth or a special lint remover (brush or upholstery is to maintain its elegant appear- roller). Remove any dirty marks using a ance and to provide it with a protective film. If the car is involved in a collision, the cloth moistened with lukewarm soapy Discoloration caused by dust and wear safety belts, belt pretensioners and other water. mainly affects the lighter shades, although components must be inspected by an When using a stain remover, always work this is not detrimental to the leather – authorized Saab dealer. from the outside towards the center to avoid indeed, the patina resulting from use is often Never make any alterations or repairs to leaving a ring. If a soiled ring or spot should considered desirable in leather. But if the the safety belt yourself but visit an autho-remain, it can usually be removed using leather is allowed to become too grubby, it rized Saab dealer. lukewarm soapy water or water alone.can start to look shabby. Wet patches left by spilt soft drinks or thin oil It is a good idea to clean and recondition the Regularly check the function of the safety must be wiped off immediately using an leather twice a year – in conjunction with a belts as follows: absorbent material, such as kitchen paper, general spring-cleaning of the car – after the and treated with stain remover.winter and in the autumn, for instance. In • Hold the diagonal strap and pull it sharply. hot, dry climates, the leather will need to be The safety belt should lock and it should Alcohol is recommended for removing treated more frequently. not be possible to withdraw it further.grease or oil stains, and a semi-stiff brush Moisten a soft cloth in a mild soap solution. Check the anchorage points in the floor. may also be used.Carefully apply this damp (not wet) cloth to They must not have suffered rust damage. the leather, working in light, circular move- There must be no frayed threads in the web- ments until the leather is clean. Repeat the bing. procedure using clean water and then leave Safety belts must not come into contact with the leather to dry thoroughly. Finally, treat substances such as polishes, oils or other the leather with a leather conditioner. chemicals. If the straps are dirty, wash them with warm water and a detergent or have them replaced.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders