Nissan Micra March K13 owners manual page 220

text version of content this owner's manual page from owners manual to the vehicle Nissan Micra, year of production 2010:

Black plate (219,1) 5. Place the ignition switch in the “ON” position toFail-safe DRIVING WITH MANUALTRANSMISSION unlock the steering wheel. GUID-FE30EFD6-3B41-4747-8ECD-CD8D5D3FE6BC(MT) When the fail-safe operation occurs, the CVT will not GUID-94986118-DE97-476D-8073-CD9082003FF5 The vehicle may be moved to the desired location. be shifted to the selected driving position. Replace the removed shift lock release cover after theIf the vehicle is driven under extreme conditions, WARNING: operation. such as excessive wheel spinning and subse- . Donotdownshiftabruptlyonslipperyroads. For model with Intelligent Key system: If the battery isquent hard braking, the fail-safe system may be This may cause a loss of vehicle control. discharged completely, the steering wheel cannot beactivated. This will occur even if all electrical. Donot over-rev the engine when shifting to unlocked. Do not move the vehicle with the steeringcircuits are functioning properly. In this case, a lower gear. This may cause a loss of wheel locked. place the ignition switch in the “OFF” position vehicle control or engine damage. If the shift lever cannot be moved out of the “P” (Park)and wait for 10 seconds. Then turn the ignition position, have a NISSAN dealer check the CVTsystemswitch back to the “ON” position. The vehicle should return to its normal operating condition. CAUTION: as soon as possible. If it does not return to its normal operating . Do not rest your foot on the clutch pedal WARNING: condition, have a NISSAN dealer check the while driving. This may damage the clutch transmission and repair it if necessary. system. If the shift lever cannot be moved from the “P” . Fully depress the clutch pedal before shift- (Park) position while the engine is running and WARNING: ing to help prevent transmission damage. the brake pedal is depressed, the stop lights When the fail-safe operation occurs, vehicle may not work. Malfunctioning stop lights could . Stop the vehicle completely before shifting cause an accident injuring yourself and others. speed may be gradually reduced. The reduced into the “R” (Reverse) position. speed may be lower than other traffic, which . When the vehicle is stopped for a period of High fluid temperature protection mode could increase the chance of a collision. Be time, for example waiting at stoplights, shift GUID-72D69A4F-20B1-4A4F-A0B0-A340C8ABB77Fespecially careful when driving. If necessary, pullto the “N” (Neutral) position and release the This transmission has a high fluid temperature protec-to the side of the road at a safe place and allow clutch pedal with the foot brake pedal tion mode. If the fluid temperature becomes too highthe transmission to return to normal operation, depressed. (for example, when climbing steep grades in high or have it repaired if necessary. temperature with heavy loads, such as when towing a . Do not shift to the "N" (Neutral) position trailer), engine power and, under some conditions, while driving. Doing so may result in an vehicle speed will be decreased automatically to accident due to loss of engine braking. reduce the chance of transmission damage. Vehicle speed can be controlled with the accelerator pedal, but engine and vehicle speed may be limited. Starting and driving 5-17 Condition: [ Edit: 2013/ 2/ 25Model: K13-A ]

owners manual Nissan Micra

owners manual Nissan Micra - year of production: 2010 - Nissan Micra March K13 owners manual EN