owners manual Nissan Micra

all ratings: 0 average rating: 5

Black plate (220,1) Starting vehicle position. HR12DE engine model (for Thailand, Pakistan, GUID-6522A6DD-EACA-4287-8F91-F52B7E8FF28C Brunei, Australia and New Zealand): 1. After starting the engine, depress the clutch pedalIfitis difficult to move the shift lever into the “R” GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B to the floor and move the shift lever to the “1” (1st)(Reverse) or “1” (1st) position, shift to the “N” (Neutral) km/h (MPH) or “R” (Reverse) position. position, and then release the clutch pedal once. Fully 1st 43 (27) 2. Slowly depress the accelerator pedal, releasingdepresstheclutch pedal again and shift into “R” or “1”. 2nd 79 (49) the clutch pedal and parking brake at the sameSuggested maximum speed in each gear 3rd 116 (72) time. GUID-E0E4461B-F5D4-409D-BCA6-C4A5F6920A72 4th 157 (97) Downshift to a lower gear if the engine is not running 5th —(—) Shifting gear smoothly, or if you need to accelerate. GUID-A54E0FD6-F94B-4469-8B26-E47E50C7AA33 HR12DE engine model (for Europe): Donotexceedthe maximum suggested speed (shown GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B below) in any gear. For level road driving, use the km/h (MPH) highest gear suggested for that speed. Always observe 1st 51 (32) posted speed limits, and drive according to the road 2nd 93 (58) conditions which will ensure safe operation. Do not over-rev the engine when shifting to a lower gear as it 3rd 137 (85) may cause engine damage or loss of vehicle control. 4th 174 (108) HR12DE engine model (for Micra Active): 5th —(—) GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B km/h (MPH) HR12DE engine model (for Indonesia, Singa- 1st 38 (24) pore): GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B SSD0084 km/h (MPH) 2nd 69 (43) To change gears, or when upshifting or downshifting, 3rd 101 (63) 1st 39 (24) fully depress the clutch pedal, shift into the appropriate 4th 128 (80) 2nd 72 (45) gear, then slowly and smoothly release the clutch 5th —(—) 3rd 105 (66) pedal. 4th 143 (89) To ensure smooth gear changes, fully depress the 5th —(—) clutch pedal before operating the shift lever. If the clutch pedal is not fully depressed before the transmission is shifted, a gear noise may be heard. Transmission damage could occur. Start the vehicle in the “1” (1st) position and shift to the “2” (2nd), “3” (3rd), “4” (4th) and “5” (5th) gear in sequence according to the vehicle speed. Youcannotshift directly from the “5” (5th) position into the “R” (Reverse) position. First shift into the “N” (Neutral) position, then shift into the “R” (Reverse) 5-18 Starting and driving Condition: [ Edit: 2013/ 2/ 25Model: K13-A ]

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders