Nissan Micra March K13 owners manual page 217

text version of content this owner's manual page from owners manual to the vehicle Nissan Micra, year of production 2010:

Black plate (216,1) allows the vehicle to be moved if the battery is Fail-safe . Avoid revving up the engine while the discharged. GUID-70726E5E-F30C-457F-B628-89E1EE84479Bvehicle is stopped. This could cause unex- When the fail-safe operation occurs, the AT will be pected vehicle movement. locked in third gear. If the vehicle is driven under extreme conditions,. Never shift to either the “P” (Park) or “R” such as excessive wheel spinning and subse- (Reverse) position while the vehicle is mov- quent hard braking, the fail-safe system may be ing. This could cause serious damage to the activated. This will occur even if all electrical transmission. circuits are functioning properly. In this case, . Except in an emergency, do not shift to the turn the ignition switch off and wait for 3 “N” (Neutral) position while driving. Coast- seconds. Then turn the ignition switch back to ingwiththetransmissioninthe“N”(Neutral) the “ON” position. The vehicle should return to position may cause serious damage to the its normal operating condition. If it does not transmission. JVS0014X return to its normal operating condition, have a . Start the engine in either the “P” (Park) or Right-Hand Drive (RHD) model NISSAN dealer check the transmission and “N” (Neutral) position. The engine will not repair it if necessary. To release the shift lock, perform the following start in any other position. If it does, have procedure DRIVING WITH CONTINUOUSLY VARI- your vehicle checked by a NISSAN dealer. 1. Models with Intelligent KEY system: Place the ABLE TRANSMISSION (CVT) . Shift into the “P” (Park) position and apply ignition switch in the “OFF” or “LOCK” position. GUID-7DB33ED5-E1EC-4DC7-9D8A-BB857680DFD7the parking brake when at a standstill for Models without Intelligent KEY system: Place theThe Continuously Variable Transmission (CVT) in yourlonger than a short waiting period. ignition switch in the “LOCK” position and removevehicle is electronically controlled to produce maximum power and smooth operation. . Keep the engine at idling speed while the key. shifting from the “N” (Neutral) position to 2. Apply the parking brake. The recommended operating procedures for this any driving position. transmission are shown on the following pages. Follow 3. Depress the shift lock release button. these procedures for maximum vehicle performance . When stopping the vehicle on an uphill 4. Push and hold the shift lever button and move theand driving enjoyment. grade, do not hold the vehicle by depressing shift lever to the “N” (Neutral) position while the accelerator pedal. The foot brake pedal holding down the shift lock release button. WARNING: should be depressed in this situation. 5. Place the ignition switch to the “ON” position toDo not downshift abruptly on slippery roads. Starting vehicle release the steering wheel lock. This may cause a loss of control. GUID-10830AE3-53E9-4C49-8A46-50D0BF37D1E3 1. After starting the engine, fully depress the foot The vehicle may be moved, by pushing, to the desired brake pedal before moving the shift lever out of the location. CAUTION: “P” (Park) position. If the shift lever cannot be moved out of the “P” (Park).The cold engine idle speed is high, so use 2. Keep the foot brake pedal depressed and move position, have a NISSAN dealer check the AT system caution when shifting the transmission into the shift lever to a driving position. as soon as possible. a forward or reverse position before the 3. Release the parking brake, the foot brake pedal, engine has warmed up. and then gradually start the vehicle in motion. 5-14 Starting and driving Condition: [ Edit: 2013/ 2/ 25Model: K13-A ]

owners manual Nissan Micra

owners manual Nissan Micra - year of production: 2010 - Nissan Micra March K13 owners manual EN