owners manual Seat Exeo

all ratings: 0 average rating: 5

exeo_EN.book Seite 201 Montag, 30. August 2010 4:45 16 Trailer towing201 Removable towing bracket Therefore, before buying such equipment, ensure that it is suitable for mounting onto the vehicle’s towing bracket and that it is approved for this purpose. To prevent damage to the ball joint from unsuitable equipment, we Introduction recommend that equipment for the towing bracket be purchased through your SEAT Dealer. Also see ⇒ page 218. Special care is required when fitting and removing the towing bracket. WARNING • Only mount equipment on the towing bracket of your vehicle if you are certain it will not damage the bracket. The use of unsuitable accessories can result in severe damage to the towing bracket, which could break while pulling a trailer. Risk of accident. • Never use tools of any kind when fitting and removing the ball joint. This would damage the locking device, no longer guaranteeing the correct working order of the bracket. This could lead to an accident. Note • Do not attempt to modify or repair the ball joint or other towing bracket Fig. 151 Luggage components. compartment: Spare • Should you have any difficulties when using the towing bracket, or wheel with towing bracket suspect that it is not fitted properly, contact a qualified workshop. The removable ball joint attachment for the towing bracket is stored under the • Before setting off, always check that the ball joint is secured properly floor panel in the luggage compartment. ⇒page204. • Vehicles with a spare wheel ⇒fig. 151. • Never disengage the ball joint with the caravan / trailer still hitched or with a bicycle rack or similar accessory still attached. The ball joint can be fitted and removed by hand. • It is advisable to remove the ball joint when you are not towing a trailer. Make sure that the cover piece is properly fitted on the mounting fixture on Accessories mounted on the towing bracket the vehicle. Please note that the ball joint attachment can be damaged by using unsuit-• Remove the ball joint before washing the vehicle with pressurised steam able equipment that is mounted onto the towing bracket (e.g. bicycle rack). equipment. Make sure the cover piece is fitted correctly onto the mounting Due to the material construction, such damage to the towing bracket dramat-fixture. ically increases safety risks and in extreme cases could lead to breakage of the towing bracket while towing ⇒. Safety First Operating Instructions Practical Tips Technical Specifications

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders