owners manual Seat Exeo

all ratings: 0 average rating: 5

exeo_EN.book Seite 199 Montag, 30. August 2010 4:45 16 Trailer towing199 Where possible, operate the trailer with the maximum permitted drawbar Notes on towing load on the ball joint of the towing bracket, but do not exceed the specified limit. Towing a trailer involves additional attention by the driver. Tyre pressure Weight distribution Check the tyre pressures on your vehicle, and adjust for “full load” conditions The weight distribution of a loaded trailer with an unladen vehicle is very (refer to the sticker listing the tyre pressures on the door pillar). It may also be unfavourable. However, if this cannot be avoided, drive extra slow to allow for necessary to adjust the tyre pressures on the trailer according to the recom-the unbalanced weight distribution. mendations of the trailer manufacturer. Speed Exterior mirrors The stability of the vehicle and trailer is reduced with increasing speed. There- Check whether you can see enough of the road behind the trailer with the fore, it is advisable not to drive at the maximum permissible speed in unfa- standard mirrors. If this is not the case you should have additional mirrors vourable road, weather or wind conditions. This especially applies when fitted. The two exterior mirrors should be fitted on folding arms. Adjust the driving downhill. mirrors to give sufficient rear vision. You should always reduce speed immediately if the trailer shows the slightest Headlights sign of swaying. Never try to stabilise the trailer by accelerating. Before starting a journey, check the headlight beam settings with the trailer Anticipate hazards and brake in good time. If towing a trailer with an inertia hitched up. If necessary, alter the height of the headlight beams by means of brake, first brake gently and then harder. This will prevent brake tapping by the headlight range control. See ⇒ page 119.the trailer wheels when they lock. Select a low gear in due course before Power supply going down a steep downhill. This enables you to use the engine braking to When you remove the ignition key, the power supply to the trailer is inter-slow down the vehicle. rupted. Swaying and pitching can be reduced by stabiliser aids. We recommend having stabiliser aids installed when towing trailers with a high trailer weight. Removable ball joint coupling They can be purchased and installed at a Technical Service. Vehicles with a factory-fitted towing bracket are equipped with a removable Reheating ball joint coupling. This is stored in the spare wheel well in the luggage compartment together with the necessary fitting instructions.When climbing long hills in hot weather with the engine running fast in low gear, you should keep an eye on the coolant temperature gauge ⇒ page 60. Reduce speed immediately if the needle moves to the right end of the scale. Note If the temperature warning lamp v in the instrument panel should start If you frequently tow, we recommend you also have the vehicle serviced flashing, stop the vehicle and let the engine cool down by running it at idling between services. speed for a few minutes. Safety First Operating InstructionsPractical Tips Technical Specifications

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders