Mercedes Benz SLK R171 owners manual page 187

text version of content this owner's manual page from owners manual to the vehicle Mercedes SLK, year of production 2004 - 2011:

171_AKB; 3; 60, en-US 2009-05-11T16:00:23+02:00 - Seite 185 d2ureepe, Version: 2.11.8.1 Useful features 185 XStep 8: Locate the “training” button on theIf you live in Canada or if you are having garage door opener motor head unit.difficulties programming a gate operator (regardless of where you live) by using the iExact location and color of the button may programming procedures, replace step 4 with vary by garage door opener brand. the following: Depending on manufacturer, the “training” XStep 4: Press and hold the signal button may also be referred to as “learn” or transmitter button (;, = or ?). Do not “smart” button. If there is difficulty locating release this button until it has been the transmitting button, refer to the garage successfully trained. door opener Operator’s Manual. XWhile still holding down the signal XStep 9: Press the “training” button on the transmitter button (;, = or ?), “cycle” garage door opener motor head unit. your hand-held remote control button B The “training light” is activated. as follows: Press and hold button B for You have 30 seconds to initiate the 2 seconds, then release it for 2 seconds, following two steps. and again press and hold it for 2 seconds. XStep 10: Return to the vehicle and firmly Repeat this sequence on the hand-heldControls in detail press, hold for 2 seconds and release the remote control until the frequency signal programmed signal transmitter button (;, has been learned. = or ?). Upon successful training, indicator XStep 11: Press, hold for 2 seconds andlamp : will flash slowly and then rapidly release same signal transmitter button aafter several seconds. second time to complete the training XProceed with programming step 5 and process. step 6 to complete. iSome garage door openers (or other iUpon completion of programming the rolling code equipped devices) may require integrated remote control, make sure you you to press, hold for 2 seconds and retain the hand-held remote control that release the same signal transmitter button came with the garage door opener, gate a third time to complete the training operator or other device. You may need it process. for use in other vehicles, for future X programming of an integrated remote Step 12: Confirm the garage door control, or simply for continued use as a operation by pressing the programmed hand-held remote control to operate the signal transmitter button (;, = or ?). respective device in other situations. XStep 13: To program the remaining two signal transmitter buttons, repeat the steps Reprogramming a single signal above starting with step 3. transmitter button Gate operator/Canadian programming To program a device using a signal Canadian radio-frequency laws require transmitter button previously trained, follow transmitter signals to “time-out” (or quit) these steps: after several seconds of transmission which may not be long enough for the integrated signal transmitter to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to “time-out” in the same manner. Z

owners manual Mercedes SLK

owners manual Mercedes SLK - year of production: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 - Mercedes Benz SLK R171 owners manual EN