owners manual Mercedes SLK

owners manual Mercedes SLK - year of production: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 - Mercedes Benz SLK R171 owners manual EN

Document: pdf (6.03 MB) 312 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mercedes SLK, year of production 2004 - 2011:

171_AKB; 3; 60, en-US 2009-05-11T16:00:23+02:00 - Seite 184 d2ureepe, Version: 2.11.8.1 184 Useful features XStep 4: Using both hands, simultaneously press hand-held remote control button B and the desired signal transmitter button (;, = or ?). Do not release the buttons until step 5 is completed. Indicator lamp : will flash, first slowly and then rapidly. iIndicator lamp : flashes immediately the first time the signal transmitter button is programmed. If this button has already Overhead control panel with integrated remote been programmed, the indicator lamp will control start flashing after 20 seconds. Hand-held remote control A is not part of the XStep 5: After indicator lamp : changes vehicle equipment. from a slow to a rapidly flashing light, release the hand-held remote control Controls in detail Programming the integrated remote button and the signal transmitter button. control XStep 6: Press and hold the just-trained XStep 1: Switch on the ignition. signal transmitter button (;, = or ?) and XStep 2: If you have previously programmedobserve indicator lamp :. a signal transmitter button and wish toIf indicator lamp : stays on constantly, retain its programming, proceed to step 3.programming is complete and your device should activate when the respective signal or transmitter button (;, = or ?) is pressed XIf you are programming the integrated and released. remote control for the first time, press and hold the two outer signal transmitter iIf indicator lamp : flashes rapidly for buttons ; and ? and release them when approximately 2 seconds and then turns to indicator lamp : begins to flash after a constant light, continue with approximately 20 seconds. programming steps 8 through 12 as your Do not hold the buttons for longer than garage door opener may be equipped with 30 seconds. the “rolling code” feature. This procedure erases any previous XStep 7: To program the remaining two settings for all three channels and signal transmitter buttons, repeat the steps initializes the memory. If you later wish to above starting with step 3. program a second and/or third hand-held transmitter to the remaining two signal Rolling code programming transmitter buttons, do not repeat this step To train a garage door opener (or other rolling and begin directly with step 3. code devices) with the rolling code feature, XStep 3: Hold the end of hand-held remote follow these instructions after completing the control A of the device you wish to train “Programming” portion (steps 1 through 6) of approximately 2 to 12 in (5 to 30 cm) away this text. For your convenience and to from the signal transmitter button (;, = complete the procedure faster, you might or ?) to be programmed, while keeping want to have someone assist you. indicator lamp : in view.

Download PDF

Click here to download a pdf file with an instruction manual for Mercedes SLK
year of production from: 2004

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.