owners manual Seat Ateca

all ratings: 0 average rating: 5

Operation Selector lever lock When stationary, apply footbrake power even at idling speed, and the vehicle while selecting a gear. tends to “creep”. The accelerator pedal must on no account be pressed inadvertently when Level lock only engages with the vehicle sta- a gear is engaged with the vehicle stationary. tionary and at speeds of up to 5 km/h The vehicle could otherwise start moving im- (3 mph). At speeds of over 5 km/h (3 mph) mediately (in some cases even if the parking the lever lock is automatically deactivated in brake is engaged) resulting in the risk of an position N. accident. ● While you are selecting a gear and the vehi- The selector lever lock is not engaged if the cle is stopped with the engine running, do selector lever is moved quickly through posi- not accelerate. Failure to follow this instruc- tion N (e.g. when shifting from R to D). This tion could result in an accident. makes it possible, for instance, to rock the ● As a driver you should never leave your ve- vehicle “backwards and forwards” if it is Fig. 166 Selector lever lock. hicle if the engine is running and a gear is en- stuck. The selector lever lock engages auto- gaged. If you have to leave your vehicle while matically if the brake pedal is not depressed The selector lever lock prevents gears from the engine is running, you must apply the and the lever is in position N for more than being engaged inadvertently, so that the ve- handbrake and engage the parking lock (P). about two seconds. hicle is not set in motion unintentionally. ● To avoid accidents, apply the handbrake and put the selector lever in position P beforeThe selector lever lock is released as follows: Interlock button opening the bonnet and working on the vehi- – Switch the ignition on. The interlock button on the selector lever cle with the engine running. Please always handle prevents the driver from inadvertently observe the important safety warnings– Press the brake pedal and, at the same engaging certain gears. Press the button in ››› page 282, Work in the engine compart- time, hold the lock button in the direction to disengage the selector lever lock. ment. of the arrow ››› Fig. 166. Automatic selector lever lockSafety interlock for ignition key Note With the ignition switched on, the selectorOnce the ignition has been turned off, the ● If the selector lever is moved accidentally lever is locked in the positions P and N. Thekey may be removed only if the gear selector to N when driving, release the accelerator and brake pedal must be pressed to release theis in position P. While the key is not in the ig- let the engine speed drop to idling before se- lever while pressing the release button if thenition, the selector lever is locked in position lecting gear range D or S again. selector lever is in the position P. As a re-P. ● Should the power supply to the selector minder for the driver, with the lever in posi- lever be interrupted in position P, the selector tions P or N the following message will be lever will be locked. If this should happen the shown on the display: manual release can be used ››› page 41.  178

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders