or
owners manual Seat Mii
owners manual Seat Mii - year of production: 2012 - Seat Mii owners manual EN
Document:
pdf (3.87 MB) 219 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Seat Mii, year of production 2012:
Advice
●Replace the wheel bolts and tighten slight-●Store the spare wheel, the temporary spare
Changing a wheel
ly using the hexagonal socket on the end ofwheel or the changed wheel securely in the
the wheel brace. luggage compartment.
●To tighten the anti-theft locking wheel bolts●Have the tightening torque of the wheel
use the corresponding adaptor.bolts checked as soon as possible with a tor-
que wrench ››› page 176.
●Lower the car with the jack.
●Have the flat tyre replaced as quickly as
●Tighten all of the wheel bolts clockwise
possible.
››› . Tighten the bolts in diagonal pairs (not
in a circle).
●Put the caps, trim or full hubcap back on
››› page 174. Tyre repair
Fig. 131 Changing a wheel: loosen wheel
WARNING
bolts with the socket at the end of the wheel
TMS (Tyre Mobility System)*
brace
If the wheel bolts are not treated suitably or
The Anti-puncture kit* (Tyre Mobility System)
not tightened to the correct torque then this
Removing the wheel
could lead to loss of vehicle control and to awill reliably seal punctures caused by the
● serious accident. penetration of a foreign body of up to about
Loosen the wheel bolts ››› page 175.
4 mm in diameter. Do not remove foreign ob-
● All the wheel bolts and hub threads should
●Jacking up the vehicle ››› page 177.
jects, e.g. screws or nails, from the tyre.
be clean and free of oil and grease. The wheel
●Using the hexagonal socket in the wheel
bolts should be easily tightened to the cor-
After inserting the sealant residue in the tyre,
brace ››› Fig. 131, unscrew the slackened
rect torque.
you must again check the tyre pressure about
wheel bolts and place them on a clean sur-
● The hexagonal socket in the wheel brace
10 minutes after starting the engine.
face.
should be used for turning wheel bolts only.
● You should only use the tire mobility set if
Take off the wheel. Do not use it to loosen or tighten the wheel
bolts. the vehicle is parked in a safe place, you are
familiar with the procedure and you have the
How to use the spare wheel or temporary
necessary tire mobility set! Otherwise, you
spare wheel
should seek professional assistance.
After changing the wheel
Check the direction of rotation of the tyre
››› page 167, Tyre code.
The tyre sealant must not be used in the
●Clean the vehicle tools, if necessary and
following cases:
●Place the spare wheel or temporary spare
put them away in the luggage compartment
wheel into position. ››› .
foam holder page 172 ●
If the wheel rim has been damaged.
178
Download PDF
Click here to download a pdf file with an instruction manual for Seat Mii
year of production from: 2012
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Seat Mii owners manual
pages 177 - 183
Seat Mii owners manual
page 180 / 219
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF