owners manual Seat Cordoba

all ratings: 0 average rating: 5

COR_ING_0707 Seite 174 Mittwoch, 1. August 2007 6:25 18 174 Checking and refilling levels Petrol additives • DIN is a German abbreviation for “Deutsches Institut für Normung e.V.”, the German standards institute. Petrol additives improve the quality of the petrol.• EN means European Norm. The quality of the petrol influences running behaviour, performance and • FAME is the English abbreviation “Fatty Acid Methyl Ester” service life of the engine. For this reason you should use good quality petrol If the date sticker of the vehicle includes the number PR 2G0 optional equip- containing additives. These additives will help to prevent corrosion, keep the ment) this means that that vehicle has been prepared for biodiesel use. fuel system clean and prevent deposits from building up in the engine.Your Authorised Service Centre or automobile association will be able to If good quality petrol with additives is not available or engine problems occur, advise on where you can obtain RME biodiesel fuel. the required additives must be added during refuelling.Your Authorised Service Centre can also be consulted to know if the vehicle has been prepared for biodiesel use. Diesel Things to note about RME fuel (biodiesel) • The performance of a vehicle using biodiesel maybe somewhat reduced. • Fuel consumption of a vehicle using biodiesel may be slightly higher. Diesel* • RME fuel can be used in winter at temperatures down to approx. -10°C. • At outside temperatures below -10°C, we recommend using winter diesel Diesel fuel must correspond to DIN EN 590 (EN = “European standard”). It fuel. must have a cetane number (CN) of at least 51. The cetane number indicates the ignition quality of the diesel fuel. Notes on filling with fuel ⇒ page 172. Caution • RME fuel can damage the fuel system in vehicles which are not suitably adjusted. • If you decide to use biodiesel in your vehicle, please use only RME fuel RME fuel* which is DIN E 14,214 compliant. Only those vehicles fitted with special equipment (number PR • If you use biodiesel that does not meet the required standard, the fuel filter could become clogged. 2G0 for biodiesel use) may use biodiesel corresponding to the standard DIN EN 14214. Note The biodiesel fuel must comply with the DIN EN 14.214 (FAME) Standard.• In case of low exterior temperatures and a fuel biodiesel percentage of • Biodiesel is a methylester obtained from rapeseed oil.higher than 50%, an increase in gas emission may occur during operation of the independent heating.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders