owners manual Skoda Fabia

all ratings: 0 average rating: 5

■ One should be constantly vigilant not to allow impermissibly high towing forcesScrew in the towing eye by hand to the left up to the stop » Fig. Ėęĕ - . For › or jerky loadings. 0here is always a risk of excessive stresses and damage result-tightening purposes, we recommend, for example, using the wheel wrench, ing at the points to which you attach the tow rope or tow bar when you attempttowing eye from another vehicle or a similar object that can be pushed through to tow a vehicle which is not standing on a paved road. the eye. ■ Attach the tow rope or the tow bar to the towing eyes or to the detachable ballIn order to reinstall the cap after screwing out the towing eye, insert it in the › head of the towing device » page ĖěĜ or » page ĖěĜ. mounts and then press on the right side of the cap. 0he cap must engage firmly. CA10ION Note ■ 0he towing eye must always be screwed in fully and firmly tightened, otherwise 3e recommend using a tow rope from ŠKODA Original Accessories available Ð the towing eye can tear when towing in or tow-starting. from a ŠKODA Service Partner. ■ 0owing another vehicle requires a certain amount of practice. Both drivers should be familiar with the particular points about towing a vehicle. 1nskilled Rear towing eye drivers should not attempt to tow in another vehicle or to be towed in. ■ 3hen towing, respect the national legal provisions, especially those which re- late to the identification of the towing vehicle and the vehicle being towed. Fig. ĖęĖ ■ 0he tow rope must not be twisted as it may in certain circumstances result in Rear towing eye Ð the front towing eye being unscrewed out of your vehicle. Front towing eye First read and observe the introductory information and safety warn- äings on page Ėěě. Ð 0he rear towing eye is located below the rear bumper on the right » Fig. ĖęĖ. Fig. Ėęĕ Front bumper: Cap/installing the towing eye First read and observe the introductory information and safety warn- ings on page Ėěě. ä Remove the cap carefully as follows. › Press on the left half of the cap in the area of the arrow » Fig. Ėęĕ - . › Remove the cap from the front bumper. Do-it-yourselfĖěĜ

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders