owners manual Skoda Fabia

all ratings: 0 average rating: 5

1se the valve remover Ė to unscrew the valve core and place it on a clean sur-Check the tyre inflation pressure after driving for Ėĕ minutes » page Ėěę. › Ð face (rag, paper, etc.). 3ARNING ■ During inflation, the tyre inflation hose and air compressor may get hot- risk Sealing and inflating tyres of injury! ■ Do not place the hot tyre inflation hose or hot air compressor on flammable First read and observe the introductory information and safety warn- materials - risk of fire! ings on page Ėěė. ä ■ If you cannot inflate the tyre to at least ė.ĕ bar, this means the damage sus- Sealing tained was too serious. 0he sealing agent cannot be used to seal the tyre.  Forcefully shake the tyre inflator bottle Ėĕ » Fig. ĖĘĜ on page ĖěĘ several times.Do not drive the vehicle. Get professional assistance! › Firmly screw the inflation hose Ę onto the tyre inflator bottle Ėĕ in a clockwise › direction. 0he film on the cap is pierced automatically. CA10ION › Remove the plug from the inflation hose Ę and plug the open end fully onto the tyre valve. Switch off the air compressor after running ĝ minutes at the latest - danger of Hold the bottle Ėĕ with the bottom facing upwards and fill all of the sealing › overheating! Allow the air compressor to cool a few minutes before switching it agent from the tyre inflator bottle into the tyre. Ð on again. › Remove the empty tyre inflator bottle from the valve. › Screw the valve core back into the tyre valve using the valve remover Ė . Check after driving for Ėĕ minutes Inflating › Screw the tyre inflation hose Ě » Fig. ĖĘĜ on page ĖěĘ of the air compressor First read and observe the introductory information and safety warn- firmly onto the tyre valve. ings on page Ėěė. ä › Check that the air release valve Ĝ is closed. › Start the engine and run it in idle. Check the tyre inflation pressure after driving for Ėĕ minutes! › Plug the connector Ğ into Ėė 2olt socket » page ěĚ, Ėė-volt power socket. › Switch on the air compressor with the ON and OFF switch ĝ . If the tyre inflation pressure is Ė.Ę bar or less: › Allow the air compressor to run until a pressure of ė.ĕ - ė.Ě bar is achieved.›  Do not drive the vehicle! 5ou cannot properly seal with tyre with the break- Maximum run time of ĝ minutes » ! down kit. › Switch off the air compressor. › Get professional assistance. › If you cannot reach an air pressure of ė.ĕ – ė.Ě bar, unscrew the tyre inflation If the tyre inflation pressure is Ė.Ę bar or more: hose Ě from the tyre valve. › Adjust the tyre inflation pressure to the correct value (see inside of fuel filler › Drive the vehicle Ėĕ metres forwards or backwards to allow the sealing agent to cap). “distribute” in the tyre. › Continue driving carefully to the nearest ŠKODA specialist garage at a maxi- › Firmly screw the tyre inflation hose Ě back onto the tyre valve and repeat the Ð mum speed of ĝĕ km/h (Ěĕ mph). inflation process. › If you cannot reach the required tyre inflation pressure here either, this means the tyre has sustained too much damage. 5ou cannot seal with tyre with the breakdown kit » . › Switch off the air compressor. › Remove the tyre inflation hose Ě from the tyre valve. Once a tyre inflation pressure of ė.ĕ – ė.Ě bar is achieved, continue the journey at a maximum speed of ĝĕ km/h (Ěĕ mph). Ėěę Do-it-yourself

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders