owners manual Mitsubishi Eclipse

owners manual Mitsubishi Eclipse - year of production: 1995, 1996, 1997, 1998, 1999 - Mitsubishi Eclipse II technical information manual EN

Document: pdf (13.48 MB) 381 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Eclipse, year of production 1995 - 1999:

POWER TRAIN - Automatic Transaxle 2-44 The overdrive clutch is the center clutch in the input clutch assembly. The clutch pack is held on thethe OD/REV clutch piston. The pressure pushes the piston forward and applies the overdrive clutch. retainer, and the piston that applies the clutch is The clutch pack is compressed against the same located around the outside of the retainer. A pressure reaction plate that the underdrive clutch uses. plate in the rear of the clutch pack is used to com- When applied, the overdrive clutch engages and press the overdrive clutch when needed. Line pres- turns the overdrive hub, which is splined to the front sure from the valve body is directed through pas- planetary carrier. When line pressure to the clutch sages in the case, oil pump housing and reaction is released, the belleville spring on the front side shaft support. It is then directed through the input of the OD/REV piston returns the piston to its re- hub and input clutch retainer to the back side of leased position. Reverse Clutch Front sun Reverse gear hub clutch Hub The reverse clutch is located in the back of the moves the piston to the back and compresses the input clutch assembly. The reverse clutch is oper- reverse clutch pack. When the clutch is applied, ated by the same piston, pressure plate and belleville it turns the front sun gear and hub assembly. spring that operates the overdrive clutch. Line pres- When line pressure to the reverse clutch is removed, sure that applies the reverse clutch comes from the belleville spring will pull the piston forward to the valve body, directed through passages in the its released position. The OD/REV clutch piston case, oil pump and reaction shaft support. The line belleville spring is positioned so it will counter the pressure then goes through the input hub to the piston to prevent either the overdrive or reverse front side of theODFIEV piston. The pressure clutches from dragging when they are not applied.

Download PDF

Click here to download a pdf file with an instruction manual for Mitsubishi Eclipse
year of production from: 1995

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.