Alfa Romeo 33 owners manual page 156

text version of content this owner's manual page from owners manual to the vehicle Alfa Romeo 33, year of production 1983 - 1995:

GEARBOX together with relevant spring, then 5. Grease and assemble spring and lock securing plug and unscrew it by 1st~2nd speed rod detent hall, using tools A.3.0304 and A.3.0309. Greaseone quarter of a rotation. Mount lock ring of 5th speed and and insert relevant bal1 into radial reverse gear rod on the end of the hole on rod. Insert then rod itself rod itself, on the differential side. into its seat on the gearbox casing, paying attention to the reciprocal 9. Assemble partially main selector position of milling and of detent hall, rod, by introducing it from the rear and make it pass through the small hub of relevant fork. side of the gearbox casing, insert it then into the selector lever, into the 6. Use relevant securing plug to close interlock plunger hole. spring and into the lever. Complete then introduction of rod. 7. Grease and use tools A.3.0303 Align axes of lever holes with the and A-3.0309 to assemble spring and Screw corresponding ones on rod and reverse gear rod 5th speed and mount pins using tool Ist-2nd speed rod detent hall. spring 6th speed and R.G. rod A.3.0322. R.G fork Insert then rod 0, together with 3rdAth speed rod 5th speed control fork 0, into Selector small hubs of 5th speed and reverse Main selector rod The speed selector lever pin @ gear lever @ and into reverse gear 1 st-2nd speed lever @ together witmust be shim fitted while the otherh control fork must be fitted as a relevant sliding sleeve. lever% pin @ striker on the edges of the pin itself, with the excess portion of the “S” clearance between 1st”2nd speed pin protruding on the selector’s side. lever and 3rd-4th speed rod 1.4 + 1.9 mm (0.055 + 0.075 in) 12. Align rhe holes and then fit rhe retaining screw 0. Tighten it according to specified torque. 0: Tightening torque Screw securing 1st2nd speed selector lever to rod: 25326 N-m (2.5 + 2.7 kgm 18.07+ 19.52 ftalb) 13. For gear synchronizing cen’ter Ist-2nd and 3rd-4th speed control forks - in that order - on toothed 1 Pin 2 Pin rings with the help of a gauge; now fit retaining screws and tighten them according to specified torque. 1 5tb speed and reverse gear lever10. Fit the guide pin for the main 2 5th speed and reversa gear rod selector rod return spring. CAUTION: 3 5th speed control fork Prior to tightening, thoroughly clean 4 Reverse gear control fork the retaining screw thread with 11. Position the 1st2nd speed le- OMNIFIT surface-active agent and ver @ on the relevant rod 0. then coat it with OMNIFIT 150 H Turn rod @ SO that specified “S” cernent clearance is established between le- 8. Align axes of holes and insert ver @ and rod 0. 0: Tightening torque spring pin of 5th speed and reverse gear lever by means of tool Screw securing fork to 1st2nd A.3.0322. and 3rd - 4th speed rod. Insert the two halls into their seats 21 f 23 N-m on central support of gearbox casing (2.1+ 2.3 kgm 15.10 f 16.63 Wb) 13-9 May 1983

owners manual Alfa Romeo 33

owners manual Alfa Romeo 33 - year of production: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 - Alfa Romeo 33 owners manual EN