Mitsubishi Outlander PHEV III 3 owners manual page 151

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Outlander PHEV, year of production 2012:

B０0203201E３.book 42 ページ㸰㸮㸯㸱年㸯㸯月㸯９日　火曜日　午前㸯㸯時５㸮分 Combination headlamps and dipper switch Lamps (headlamps, fog lamp, When you want to keep the lamps Dipper (High/Low beam etc.) auto-cutout function on: change) zIf the operation mode of the power switch 1.Turn the lamp switch in the “OFF” posi- E00506201544 is put in OFF or ACC while the lamp tion while the operation mode of the When the lamp switch is in the “ ” posi- switch is in the “ ” or “ ” position, power switch is in OFF or ACC. tion, the beam changes from high to low (or the lamps will turn off automatically 2.Turn on the lamps with the switch in the low to high) each time the lever is pulled when the driver"s door is opened. “ ” or “ ” position again, then thefully (1). While the high beam is on, the high zIf the operation mode of the power switch lamps will remain on. beam indicator lamp in the instrument cluster 6 is put in OFF or ACC while the lamp will also illuminate. switch is in the “ ” or “ ” position, NOTE the lamps will remain on for about 3 min- zIf you place the light switch in the “ ” utes while the driver’s door is shut and position, the lamps will not be automatically will then automatically turn off. turned off. NOTE 3.When 1 minute has passed, the lamps will zThe lamp auto-cutout function can also be automatically be turned off. disabled. For further information, we recommend you Lamp monitor buzzer to consult a MITSUBISHI MOTORS E00506101631 Authorised Service Point. If the driver’s door is opened when the opera- On vehicles equipped with Mitsubishi Multi- tion mode of the power switch is put in ACC Communication System (MMCS), screen or OFF with the lamps illuminated, a buzzer Headlamp flasher operations can be used to make the adjust- will sound to remind the driver to turn off the ment. Refer to the separate owner’s manual lamps. E00506300199 for details. The high beams flash when the lever is pulled The buzzer will automatically stop if the slightly (2), and will go off when it is auto-cutoff function is activated, the lampreleased. switch is turned off, or the door is closed. When the high beam is on, the high beam indicator lamp in the instrument cluster will illuminate. 6-42 Instruments and controls

owners manual Mitsubishi Outlander PHEV

owners manual Mitsubishi Outlander PHEV - year of production: 2012 - Mitsubishi Outlander PHEV III 3 owners manual EN