Mitsubishi Outlander PHEV III 3 owners manual page 152

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Outlander PHEV, year of production 2012:

B０0203201E３.book 43 ページ㸰㸮㸯㸱年㸯㸯月㸯９日　火曜日　午前㸯㸯時５㸮分 Combination headlamps and dipper switch NOTE NOTE 3.Within 60 seconds of putting the opera- zThe high beams can also flash when the lamp •Turn the combination headlamps and dip- tion mode in OFF, pull the turn signal switch is OFF. per switch to the “ ” or “ ” position. lever towards you. zIf you turn the lamps off with the headlamps •Put the operation mode of the power switch set to highbeam, the headlamps are automati- in ON. cally returned to their low-beam setting zIt is possible to modify functions as follows: when the lamp switch is next turned to the •The headlamps can be set to come on in the “” position. low beam setting. •The welcome light function can be deacti- 6 vated. Welcome light For further information, please contact your E00528901600 MITSUBISHI MOTORS Authorised Service This function turns on the position and tail Point. lamps for about 30 seconds after the On vehicles equipped with Mitsubishi Multi- UNLOCK switch on the remote control trans- Communication System (MMCS), screen 4.The headlamps will come on in the low mitter is pressed when the combination head- operations can be used to make the adjust- beam setting for about 30 seconds. After lamps and dipper switch is in the “OFF” or ment. Refer to the separate owner’s manual the headlamps go off, the headlamps can “AUTO” position (for vehicles equipped with for details. be turned on again in the low beam setting the automatic lamp control). On vehicles for about 30 seconds by pulling the turn equipped with the automatic lamp control Coming home light signal lever towards you within 60 sec- (except for vehicles equipped with LDW), the E00529001549 onds of putting the operation mode in welcome light function will operate only This function turns on the headlamps in the OFF. when it is dark outside the vehicle. low beam setting for about 30 seconds after To turn on the headlamps again after 60 the operation mode is put in OFF. seconds of putting the operation mode in NOTE OFF, repeat the process from step 1. zWhile the welcome light function is operat- 1.Turn the combination headlamps and dip- ing, perform one of the following operations per switch to the “OFF” or “AUTO” posi- NOTE to cancel the function. tion (for vehicles equipped with the zWhile the coming home light function is •Push the LOCK switch on the remote con- automatic lamp control). operating, perform one of the following trol transmitter. 2.Put the operation mode of the power operations to cancel the function. switch in OFF. •Pull the turn signal lever towards you. Instruments and controls 6-43

owners manual Mitsubishi Outlander PHEV

owners manual Mitsubishi Outlander PHEV - year of production: 2012 - Mitsubishi Outlander PHEV III 3 owners manual EN