or
owners manual Seat Alhambra
owners manual Seat Alhambra - year of production: 2010 - Seat Alhambra II 2 owners manual EN
Document:
pdf (5.73 MB) 305 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Seat Alhambra, year of production 2010:
Operation
The position of each of the gears is shown on When the ignition is on, the current position
your hand is transmitted to the gearbox se-
the gear stick ››› Fig. 129. of the selector lever is shown on the instru-
lector forks.
ment panel.
● Always ensure that the vehicle is complete-
●Keep the clutch pedal pushed all the way
ly stopped before engaging the reverse gear.
down.
Selector
● When changing gear, always make sure theDenomi-
●Move the gearbox lever to the required po- lever po- Meaning ›››
clutch pedal is pushed right to the floor. nation
sition. sitions
● Never hold the vehicle “on the clutch” on
In some countries, it is necessary to press thehills with the engine on. The driven wheels are locked
mechanically.
clutch pedal to the floor to start the engine.
They only engage when the
Parkingvehicle is at a standstill. To
Selecting reverse gear
Automatic gearbox*: selecting gears lock change the position of the
selector lever, press the
●With the vehicle at a standstill, press the
brake pedal and switch on
clutch pedal to the floor and keep pressed.
the ignition.
●Push the gear lever down.
Reverse gear is engaged.
●Move the gear stick to the left and then for-
ReverseOnly select reverse gear
R
wards to reverse gear ››› Fig. 129 .
gear when the vehicle is at a
standstill.
WARNING
The gear box is in neutral. No
When the engine is running, the vehicle will movement is transmitted to
Neutral
start to move as soon as a gear is engaged the wheels and the engine
and the clutch released. This is also the case does not act as a brake.
with the electronic parking brake on.
Fig. 130 Automatic gearbox selector lever
Standard
The gears are changed (up
● Never engage the reverse gear when a vehi-
with locking button (arrow) forwards
and down) automatically.
cle is moving forward.
driving
The gear shifts are deter-
position
The selector lever has a lock. When changing
mined by the engine load,
(normal
the selector lever from position P to a range
your individual driving style
CAUTION
pro-
of gears, press the brake pedal and press the and the speed of the vehicle.
gramme)
To prevent damage and avoid premature
lock on the selector lever, located on the
wear, please observe the following:
front part of the knob, in the direction of the
● While driving, do not leave your hand rest-
arrow ››› Fig. 130. To move the gear selector
ing on the gear stick. The pressure applied by
lever from the position N to D or to R, first
press and hold the brake pedal.
144
Download PDF
Click here to download a pdf file with an instruction manual for Seat Alhambra
year of production from: 2010
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Seat Alhambra II 2 owners manual
pages 143 - 149
Seat Alhambra II 2 owners manual
page 146 / 305
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF