owners manual Seat Alhambra

all ratings: 0 average rating: 5

Operation frequently, or if rust has formed on the discs, WARNING WARNING SEAT recommends cleaning the pads and New brake pads do not brake to full efficien-Wet, frozen or salt-covered brakes take lon- discs by braking firmly a few times at a mod- cy. ger to engage and this increases braking dis- erately high speed. Only do this without en- tances. ● For the first 320 km, new brake pads have dangering vehicles behind you or any other not yet reached their maximum braking ca-● Test the brakes carefully. road users ››› . pacity, and need to be “run in” first. For this, ● Dry the brakes, free them of ice and salt by to compensate for reduced braking efficiency braking gently several times, when weather, Faults in the brake system the brake pedal will have to be pressed with road and traffic conditions permit. During braking, if you notice that the vehiclemore force. does not react as usual (that the braking dis- ● To avoid losing control of the vehicle and WARNING tance has increased suddenly) it may be pos- causing serious accidents, always take great sible that there is a fault in the braking sys-care when driving with new brake pads.Driving without the brake servo may signifi- tem. The  warning lamp lights up and a cantly increase the braking distance and re- ● When running in new brake pads, always text message displayed. Take the vehicle to a sult in a severe accident. respect the safety distances between you and specialised workshop immediately and have other vehicles and do not cause situations re-● Never allow the vehicle to move forwards the fault repaired. Drive at a moderate speedquiring extreme braking performance. when the engine is switched off. and be prepared to use more pressure on the ● If the brake servo does not operate or the brake pedal, and allow for longer stopping vehicle must be towed, then the brake pedal WARNING distances. will have to be pressed with more force given When brakes overheat, braking is less effi- that the braking distance will be increased cient and braking distances increase. Brake servo when the brake servo does not operate. ● When driving on slopes, brakes can be The brake servo only operates when the en- overloaded and overheat quickly. gine is running and the pressure applied by CAUTION ● Reduce speed or change down a gear when the driver on the brake pedal increases. ● Never make the brakes “slip” by pressing faced with steep and long slopes. This allows the pedal gently, if it is not really necessary If the brake servo does not operate or the ve-you to use the engine braking effect and to to brake. Continuously pressing on the brake hicle must be towed, then the brake pedalreduce the strain on the brake system. pedal will heat the brakes. This could signifi- will have to be pressed with more force given ● Non-standard or damaged front spoilers cantly reduce braking power, increase brak- that the braking distance will be increased could restrict the airflow to the brakes and ing distance or even result in the total failure ››› when the brake servo does not operate .cause them to overheat. of the brake system. ● Reduce speed or change down a gear when faced with steep and long slopes. This allows you to use the engine braking effect and to 142

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders