or
owners manual Alfa Romeo 33
owners manual Alfa Romeo 33 - year of production: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 - Alfa Romeo 33 owners manual EN
Document: pdf (12.9 MB) 378 pages
all ratings: 0 average rating: 5
text version of content this owner's manual page from owners manual to the vehicle Alfa Romeo 33, year of production 1983 - 1995:
COMPLETE CAR
ADJUSTING WHEEL
BEARING PRELOAD
After replacement or disassembly of
bearings, carry out adjustment oper-
ating as follows.
For wheel bearing replacement refer
to Group 25.
1. Tighten wheel bearing lock-nut
according to specified torqueand at
the same time turn hub 4+ 5 times
5. Caulk nut taking care to avoid
in both directions to allow bearings
to settle. rotation in order not to alter clear-
ance play.
@ : Tightening torque
Wheel bearing lock-nut Apply specified grease quantity to
25 + 29 N-m bearings in the suspension.
(2.5 + 3 kg-m CHECKING
18.08 + 21.69&lb)
SUSPENSION
HEIGHTS
Be sure to perform following prelim-
inary operations:
a. Set up vehicle with all refill
liquids at max. level and with
spare wheel.
b. Check tire pressure; refer to
“Wheels and Tires” for specified
values.
3. Check shock absorbers for oil
leaks or damage. c. Place car on lift.
d. Load weights on vehicle as
4. Remove wheels. 2. Partially unscrew lock-nutand
shown in below figure.
hit the hub with a mallet to ensure
5. Check brake pads for wear
e. Move vehicle up and down on
outer bearing settling against washer
(Refer to:Group 22 - Front Disc suspensions a few times.
Brake). and.nut.
3. t-land tighten the nut (moder-
Static load equivalent to three
ately, so as to obtaina less
passengers plus luggage
than 1N.m; 0.1 kg.m; 0.72ftalb - Passenger equivalent to
REAR AXLE AND
torque). A i- 6 = 490 + 245 = 735 N
REAR SUSPENSION
4. Check and make sure axial play
(50 + 25 = 75kg)
is within specified value. (110 +55= 165 lb)
CHECKING REAR AXLEBearing axial play
AND SUSPENSION PARTS
0 + 0.05 mm (0 + 0.002 in) Luggage C = 490 N (50 kg; 1IO lb)
1. Check rear axle and suspension
for loose, worn or damaged parts.
2. With vehicle in nominal driving
condition, i.e. with static load (Refer
to: Checking Suspension Heights),
tighten loose bolts according to
specified tightening torque. Refer to:
Group 25 Service Data and Specifi-
cations for relevant tightening
torques.
3. Replace worn parts according to
the relevant procedures described in
Group 25.
May 1983 00-40
Download PDFClick here to download a pdf file with an instruction manual for Alfa Romeo 33
year of production from: 1983
Do you prefer pdf format?Find out how to download
Enter the code to download PDF file:
:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Alfa Romeo 33 owners manual
pages 137 - 143
pages 137 - 143
Alfa Romeo 33 owners manual
page 140 / 378
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDFOthers owner's manuals for this model: