or
owners manual Nissan Skyline
owners manual Nissan Skyline - year of production: 1998, 1999, 2000, 2001, 2002 - Nissan Skyline R34 workshop service manual EN
Document: pdf (13.3 MB) 230 pages
all ratings: 0 average rating: 5
text version of content this owner's manual page from owners manual to the vehicle Nissan Skyline, year of production 1998 - 2002:
TCSfABS SYSTEM
CONSULT for TCSfABS Control Unit Control
System (Cont'd)
Diagnostic item Diagnostic item is detected when . I Check item
Total control signal (multiple signal) for engine, All and TCSIABS is abnormal (open or
LAN CIRCUIT 1 shorted communication harness,-faulty connections, abnormal TCSIABS control unit or signal 1, 2
ECM.TCM or ECM). (multiple sig-
ECM.TCM or ECM power is cut off or decreased for 2 seconds or longer. nal) for
Total control signal (multiple signal) for engine, ArT and TCSIABS is suspected to be
LAN CIRCUIT 2 interrupted (open or shorted communication harness, faulty connections, abnormal and TCSI
TCS/ABS control unit or ECM TCM or ECM). ABS
ECM.TCM or ECM power is cut off or decreased for 2 seconds or longer.
NOTE:
If "NO FAILn is displayed as a result of the CONSULT self-diagnosis when the ABS warning lamp is lit, inspect the engine speed
signal circuit.
If "ABSn is not displayed on "SELECT SYSTEM" screen, check ABS control unit and data link connector circuit, and make sure of
the CONSULT card number.
If "ENGINE SYSTEM", "LAN SIGNAL 1". "LAN SIGNAL 2", "LAN SIGNAL 3, "LAN CIRCUIT 1" or "LAN CIRCUIT 2" is displayed
on the screen, perform the self-diagnosis for the ECM.TCM or ECM.
If "THROlTLE CONTROLLER COMMUNICATIONn is displayed on the screen, perform the self-diagnosis for throttle control unit.
DATA MONITOR PROCEDURE
a Refer to CONSULT Instruction Manual for details on data
monitor function.
1. Turn ignition switch OFF.
2. Connect CONSULT connector to data link connector for CON-
SU LT.
3. Turn ignition switch ON.
4. Touch "START" on CONSULT screen.
5. Touch "ABS" on CONSULT screen.
a If "START" is touched immediately after engine is started
or ignition switch is turned ON, "ABS" may not be dis-
played on "SELECT SYSTEM" screen. To display "ABS",
repeat the data monitor procedure from the beginning.
Touch "DATA MONITOR".
Touch "SETTING" to set recording condition.
Touch "AUTO TRIG", "LONG TIME" and then "ENTER".
Return to "SELECT MONITOR ITEM" screen and touch "C/U
INPUT ITEM", "ALL SIGNALS" or "SELECTION FROM
MENU". Refer to "DATA MONITOR MODE" on the next page.
10. Touch "START".
11. Display data monitor.
12. If necessary, sequentially touch "REC START, "REC STOP",
"DATA DISPLAY", "NUMBER PRINT" and "PRINT" to print out
the data.
Download PDFClick here to download a pdf file with an instruction manual for Nissan Skyline
year of production from: 1998
Do you prefer pdf format?Find out how to download
Enter the code to download PDF file:
:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Nissan Skyline R34 workshop service manual
pages 106 - 112
pages 106 - 112
Nissan Skyline R34 workshop service manual
page 109 / 230
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDFOthers owner's manuals for this model: