BMW 5 E60 E61 owners manual page 99

text version of content this owner's manual page from owners manual to the vehicle BMW 5 E60, year of production 2003 - 2010:

The equipment can be used as of ignition The corresponding memory button 1 is now key position 2. programmed with the signal of the original If the device cannot be used even hand-held transmitter. after repeated programming, check If you have any additional questions, At a glance whether the original hand-held transmitter please contact your BMW center.< is equipped with an alternating-code sys- tem. Here, either read the instructions for Clearing the memory buttons the original hand-held transmitter or hold Press both outer buttons 1 of the inte- down the programmed memory button 1 of grated universal remote control for approx. the integrated universal remote control. If 20 seconds until the indicator lamp 2 the indicator lamp 2 on the integrated uni-flashes. All memory buttons will be cleared. versal remote control flashes rapidly for a Controls short time then lights up for approx. 2 sec-The memory of individual memory onds, this indicates that the original hand-buttons 1 cannot be cleared. held transmitter uses an alternating-code system. In the case of an alternating-code Roller sun blinds* system, program the memory buttons 1 as described at Alternating-code hand-held transmitters.< Roller sun blind for rear window Driving tips Alternating-code hand-held transmitters To program the integrated universal remote control, consult the operating instructions for the equipment to be set. You will find Navigation information there on the possibilities for synchronization. When programming hand-held transmitters that employ an alternating code, please observe the following supplementary To actuate as of ignition key position 1, instructions: briefly press the button in the driver's door. Programming will be easier with the Roller sun blinds for rear side Entertainment aid of a second person.< windows 1. Park your vehicle within the range of the Pull the roller sun blind at the loop and remote-controlled device hook up to the bracket. 2. Program the integrated universal remote control as described above at Fixed-code hand-held transmitters 3. Locate the button at the receiver of the Communications equipment to be set, e.g. on the drive 4. Press the button on the receiver of the device you want to set up. After step 4, you have approx. 30 seconds for step 5 5. Press the programmed memory button 1 of the integrated universal Mobility remote control three times. 97 Online Edition for Part No. 01 41 0 157 647 - © 07/03 BMW AG Reference

owners manual BMW 5 E60

owners manual BMW 5 E60 - year of production: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 - BMW 5 E60 E61 owners manual EN