BMW 5 E60 E61 owners manual page 98

text version of content this owner's manual page from owners manual to the vehicle BMW 5 E60, year of production 2003 - 2010:

Practical interior accessories Integrated universal remote Programming control* The concept The integrated universal remote control replaces up to three different hand-held transmitters for various remote-controlled equipment such as door openers and house alarm systems. The integrated uni- versal remote control registers and stores signals from the original hand-held trans- 1 Memory buttons mitters. 2 Indicator lamp The signal of an original hand-held trans- mitter can be programmed on one of the Fixed-code hand-held transmitter three memory buttons 1. Following that, 1. Turn the ignition key to position 2 each of the devices can be actuated with the appropriately programmed memory 2. When using for the first time: button 1. The indicator lamp 2 flashes to Press both outer buttons 1 for approx. confirm transmission of the signal. 20 seconds until the indicator lamp 2 If the vehicle is sold, the memory of the but-flashes. The three memory buttons 1 tons 1 should be cleared, refer to page 97. are cleared Practical interior accessories To prevent possible damage or injury, 3. Hold the original hand-held transmitter before programming or using the inte- at a distance of approx. 2 in/5 cm to grated universal remote control, always 8 in/20 cm to the memory buttons 1 inspect the immediate area to make certain The required distance between that no people, animals or objects are the hand-held transmitter and the within the travel range of the device. Also, memory buttons 1 depends on the rele- comply with the safety precautions of the vant system of the original hand-held original hand-held transmitter.< transmitter used.< Checking the compatibility 4. Simultaneously press the transmit but- ton on the original hand-held transmit- If you see this symbol on the pack- ter and the desired memory button 1 on aging or in the manual supplied with the integrated universal remote control. the original hand-held transmitter, it Initially, the indicator lamp 2 flashes is safe to assume that it is compatible with slowly. Release both buttons as soon the integrated universal remote control. as the indicator 2 lamp flashes rapidly. If If you have additional questions, the indicator lamp 2 does not flash rap- please consult your BMW center or idly after approx. 15 seconds, change call 1-800-355-3515. the distance You can also visit these websites: 5. To program other original hand-held www.bmwusa.com or transmitters, repeat steps 3 and 4. www.homelink.com. The corresponding memory button 1 is now HomeLink is a registered trademark owned programmed with the signal of the original by Johnson Controls, Inc.< hand-held transmitter. 96 Online Edition for Part No. 01 41 0 157 647 - © 07/03 BMW AG

owners manual BMW 5 E60

owners manual BMW 5 E60 - year of production: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 - BMW 5 E60 E61 owners manual EN