owners manual Mitsubishi Outlander PHEV

owners manual Mitsubishi Outlander PHEV - year of production: 2012 - Mitsubishi Outlander PHEV III 3 owners manual EN

Document: pdf (21.01 MB) 388 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Outlander PHEV, year of production 2012:

B０0203201E３.book 19 ページ㸰㸮㸯㸱年㸯㸯月㸯９日　火曜日　午前㸯㸯時５㸮分 Child restraint To install 3.To activate the ALR mode, slowly pull the5.After confirming that the belt is locked, shoulder part of the belt all the way outgrab the shoulder part of the belt near the 1.Place the child restraint system on the rearuntil it stops, then let the belt feed backbuckle and pull up to remove any slack seat. into the retractor. from the lap part of the belt. Remember, if 2.Route the belt through the child restraint the lap part of the belt is not tight, the according to the child restraint system child restraint will not be secure. It may manufacturer’s instructions, then insert help to put weight on the child restraint, the latch plate into the buckle. or push on the seatback while pulling up5 on the belt. 4.After the belt has retracted, tug on it. If the belt is locked, you will not be able to pull it out. If you can pull the belt out, it is not locked and you will need to repeat these steps. 6.Attach the top tether anchor strap to the child restraint anchorage point and tighten the tether anchor strap (refer to page 5-16). 7.Before putting the child in the restraint, push and pull the restraint in all directions to be sure it is secure. Do this before each use. NOTE zIf the seat belt does not lock, rewind it fully then perform step 2 to 7 again. Seat and seat belts5-19

Download PDF

Click here to download a pdf file with an instruction manual for Mitsubishi Outlander PHEV
year of production from: 2012

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.