owners manual Chrysler 300C

all ratings: 0 average rating: 5

90 THINGS TO KNOW BEFORE STARTINGYOUR VEHICLE 8. If the child restraint has a top tether strap and theInstalling A Child Restraint With A Cinching seating position has a top tether anchorage, connectLatch Plate (CINCH) — If Equipped the tether strap to the anchorage and tighten the tether1. Place the child seat in the center of the seating strap. Refer to “Lower Anchors and Tethers for Chil-position. For some second row seats, you may need to dren (LATCH) Restraint System” for directions torecline the seat and / or raise the head restraint to get attach a tether anchor. a better fit. 9. Test that the child restraint is installed tightly by2. Next, pull enough of the seat belt webbing from the pulling back and forth on the child seat at the beltretractor to pass it through the belt path of the child path. It should not move more than 1 inch (25.4 mm)restraint. Do not twist the belt webbing in the belt in any direction. path. Anyseat belt system will loosen with time, so check the3. Slide the latch plate into the buckle until you hear a belt occasionally, and pull it tight if necessary.“click.” 4. Finally, pull up on any excess webbing to tighten the lap portion around the child restraint while you push the child restraint rearward and downward into the vehicle seat.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders