owners manual Nissan Murano

all ratings: 0 average rating: 5

grammed HomeLink button - releasing button,firmlypressand releasethe when the device begins to activate. HomeLink button you’ve just programmed. 5. If the indicator light on the HomeLinkblinksPress and release the HomeLink button up rapidly for two seconds and then turns solid,to three times to complete the training. HomeLink has picked up a “rolling code”8. Your HomeLink button should now be pro- garage door opener signal. You will need togrammed.(Toprogramtheremaining proceed with the next steps to train theHomeLinkbuttons for additional door or HomeLink to complete the programminggate openers, follow steps 2 through 8 only.) which may require a ladder and anotherNOTE: person for convenience. 6. Press and release the “smart” or “learn”Donotrepeatsteponeunlessyouwantto program button located on the garage door“clear”allpreviouslyprogrammed opener’s motor to activate the “trainingHomeLink buttons). SIC2072 mode”.Thisbuttonisusually located near theIf you have any questions or are having difficulty 3. Using both hands, simultaneously press andantenna wire that hangs down from the mo-programming your HomeLinkbuttons, please hold both the HomeLink button you want totor. If the wire originates from under a lightrefertotheHomeLinkwebsite at: program and the hand-held transmitter but-lens, you will need to remove the lens towww.homelink.com or call 1-800-662-6200. ton. access the program button. PROGRAMMINGHomeLink FOR DONOTreleasethebuttonsuntil step 4 hasNOTE: CANADIAN CUSTOMERS been completed. 4. Hold down both buttons until the indicatorOnce you have pressed and released thePrior to 1992, D.O.C. regulations required hand- light on the HomeLinkflashes, changingprogram button on the garage door open-held transmitters to stop transmitting after 2 from a “slow blink” to a “rapidly flashinger’s motorandthe“traininglight”islit,youseconds. To program your hand-held transmitter blink”. This could take up to 90 seconds.have 30 seconds in which to perform stepto HomeLink , continue to press and hold the Whentheindicator light flashes rapidly, both7. Use the help of a second person for buttons may be released. The rapidly flashingconvenience to assist when performingHomeLinkbutton (note steps 2 through 4 light indicates successful programming. Tothis step. under “Programming HomeLink ”) while you activate the garage door or other pro-7. Quickly within 30 seconds of pressing andpress and re-press (“cycle”) your hand-held grammed device, press and hold the pro-releasing the garage door opener programtransmitter every 2 seconds until the indicator Instruments and controls 2-41
03.1.28/Z50-D/V5.0 

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders