or
owners manual Nissan Cube
owners manual Nissan Cube - year of production: 2008 - Nissan Cube owners manual EN
Document:
pdf (3 MB) 329 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Nissan Cube, year of production 2008:
Black plate (89,1)
WARNING See “CRUISE CONTROL” in the “5. StartingMalfunction Indicator Light (MIL)
and driving” section.
If the supplemental air bag warningFront passenger air bag statusIfthe malfunction indicator light illuminates
light is on, it could mean that the front steady or blinks while the engine is running, it
air bag, side air bag, curtain air baglight may indicate a potential emission control and/or
and/or pretensioner systems will not Continuously Variable Transmission (CVT) mal-
The front passenger air bag status light (locatedfunction.
operate in an accident. To help avoidon the center of the instrument panel) will be lit
injury to yourself or others, have yourand the passenger front air bag will be OFFThe malfunction indicator light may also illumi-
vehicle checked by a NISSAN dealer asdepending on how the front passenger seat isnate steady if the fuel-filler cap is loose or
soon as possible. being used. missing, or if the vehicle runs out of fuel. Check
to make sure the fuel-filler cap is installed and
INDICATOR LIGHTS For front passenger air bag status light opera-closed tightly, and that the vehicle has at least 3
tion,see“NISSANADVANCEDAIRBAG
USgallons (11.4 liters) of fuel in the fuel tank.
SYSTEM (front seats)” in the “1. Safety —
Cruise indicator light (if soSeats, seat belts and supplemental restraintAfter a few driving trips, thelight should
equipped) system” section of this manual.turn off if no other potential emission control
system malfunction exists.
Cruise main switch indicator: Engine start operation indicatorIf this indicator light remains on for 20 seconds
This light illuminates when the cruise controllight (if so equipped)and then blinks for 10 seconds when the engine
main switch is pushed. The light turns off when is not running, it indicates that the vehicle is not
the main switch is pushed again. When theThis light appears when the selector lever is inready for an emission control system inspection/
cruise indicator light illuminates, the cruisethe P (Park) position. This light means that themaintenance test. (See “READINESS FOR
control system is operational.engine will start by pushing the ignition switchINSPECTION/MAINTENANCE (I/M) TEST” in
with the brake pedal depressed. You can startthe “9. Technical and consumer information”
Cruise malfunction: the engine directly in any position.section.)
Ifthe cruise indicator light blinks while theHigh beam indicator lightOperation:
engine is running, it may indicate the cruise The malfunction indicator light will illuminate in
control system is not functioning properly. HaveThis light illuminates when the headlight highone of two ways:
the system checked by a NISSAN dealer.beam is on and goes out when the low beam is
selected. . Malfunction indicator light illuminated steady
Instruments and controls 2-15
Model "Z12-D" EDITED: 2009/ 9/ 17
Download PDF
Click here to download a pdf file with an instruction manual for Nissan Cube
year of production from: 2008
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Nissan Cube owners manual
pages 86 - 92
Nissan Cube owners manual
page 89 / 329
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF