owners manual Ford B-Max

all ratings: 0 average rating: 5

Starting and Stopping the Engine Note:Releasing the clutch pedal while theEngine Idle Speed after Starting engine is starting will stop the engineThe speed at which the engine idles cranking and return to ignition on.immediately after starting is optimised to 1.Fully depress the clutch pedal.minimise vehicle emissions and ma ximise 2.Start the engine. cabin comfort and fuel economy. Vehicles with A utomatic TransmissionThe idle speed will vary depending on certain factors. These include vehicle Note:Do not touch the accelerator pedal.component and ambient t emperatures as 1.Move the transmission selector leverwell as electrical and climate system to position P or N. demands. 2.Start the engine. Failure to Start All Vehicles Vehicles with Manual Transmission If the engine does not start within 10If the engine does not crank when the seconds, wait for a short period and tryclutch pedal has been fully depressed and again. the ignition key is turned to position III. If the engine does not start after three1.Fully depress the clutch and brake attempts, wait 10 seconds and follow thepedals. flooded engine procedure. 2.Turn the key to position III until the If you have difficulty starting the engineengine has started. when the temperature is below -13°F (-25°C), press the a ccelerator pedal to theSTARTING A DIESEL ENGINE mid-way point of its travel and try again. Flooded Engine Cold or Hot Engine Vehicles with Manual TransmissionAll Vehicles 1.Fully depress the clutch pedal.Note:When the temperature is below 5°F 2.Fully depr ess the a ccelerator pedal and(-15°C), you may need to crank the engine hold it there. for up to 10 seconds. 3.Start the engine. Note:You can only operate the starter for a limited period of time. Vehicles with A utomatic TransmissionNote:After a limited number of attempts 1.Move the transmission selector leverto start your engine, the system will not to position P or N. allow you to try again until a period of time 2.Fully depr ess the a ccelerator pedal andhas elapsed, for example 30 minutes. hold it there. Switch the ignition on and wait 3.Start the engine. until the glow plug indic ator goes off. All Vehicles Vehicles With Manual Transmission If the engine does not s tart, repeat the c oldNote:Do not touch the accelerator pedal. or hot engine procedure. 86

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders