owners manual Toyota Corolla

all ratings: 0 average rating: 5

1998 COROLLA(U) Your automatic transmission has a shift(b) Using engine brakingWith the selector lever in ”2”, the vehicle lock system to minimize the possibility of To use engine braking, you can downshiftwill start in the first gear and automatical- incorrect operation. This means you canthe transmission as follows:ly shift to the second gear. only shift out of ”P” position when the With the selector lever in ”L”, the trans- brake pedal is depressed (with the ignition Shift into the ”2” position when the mission is engaged in the first gear. switch in ”ON” position and the lock re- vehicle speed is lower than 93 km/h lease button depressed). (58 mph). The transmission will down- NOTICE (a) Normal driving shift to the second gear and more en- gine braking will be obtained.Be careful not to overrev the en- 1. Start the engine as instructed in ”How Shift into the ”L” position when thegine. Watch the tachometer to keep to start the engine” in Part 3. Thevehicle speed is lower than 37 km/hengine rpm from going into the red transmission must be in ”P” or ”N”.(23 mph). The transmission will down- zone. The approximate maximum al- lowable speed for each position is 2. With your foot holding down the brakeshift to the first gear and maximum pedal, shift the selector lever to ”D”.engine braking will be applied.given below for your reference: In ”D” position, the automatic transmission ”2”.120 km/h (75 mph) system will select the most suitable gearCAUTION ”L”65 km/h (40 mph) for different running conditions such as Do not continue hill climbing or normal cruising, hill climbing, hard towing,Be careful when downshifting on ahard towing for a long time in the etc. slippery surface. Abrupt shifting”2” or ”L” position. This may cause could cause the vehicle to spin orsevere automatic transmission dam- CAUTION skid. age from overheating. To prevent such damage, ”D” position should Never put your foot on the accelera-(c) Using the ”2” and ”L” positionbe used in hill climbing or hard tor pedal while shifting. towing. The ”2” and ”L” positions are used for strong engine braking as described pre- 3. Release the parking brake and brake (d) Backing up viously. pedal. Depress the accelerator pedal With the selector lever in ”2” or ”L”, you 1. Bring the vehicle to a complete stop. slowly for smooth starting. can start the vehicle in motion as with the 2. With the brake pedal held down with lever in ”D”. your foot, shift the selector lever to the ”R” position. 85

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders