Nissan Skyline R34 workshop service manual page 84

text version of content this owner's manual page from owners manual to the vehicle Nissan Skyline, year of production 1998 - 2002:

ANTI-LOCK BRAKE SYSTEM ABS control unit connector Control Unit InputlOutput Signal Specifications USING CIRCUIT TESTER To perform the following inspection, the ignition switch should be turned ON with ABS control unit connector and actuator connector properly connected. Terminal No. Item Specifications*l Battery Ignition switch ON: Battery voltage (Approx. 12V) Control unit power supply circuit ST Stop lamp signal Brake pedal is depressed: Battery voltage (Approx. 12V) Stop lamp switch Brake pedal is not depressed: Less than approx. 2V and circuit R8 ABS motor is running ABS motor, motor ABS motor relay (in CONSULT active test mode): Less than approx. 2V relay and circuit ABS motor is stopped: Battery voltage (Approx. 12V) Actuator relay is activated (with engine running): Less than approx. 2V ABS actuator relay Actuator relay Actuator relay is not activated (with fail-safe function activated and engine and circuit not running): Battery voltage (Approx. 12V) pL Actuator relay is activated (with engine running): Battery voltage (Approx. ABS warning lamp Actuator relay 1 2V) and circuit, ABS monitor Actuator relay is not activated (with fail-safe function activated and engine actuator relay SD not running): Approx. OV monitor circuit Front right inlet Actuator is activated (in CONSULT active test mode), or actuator relay is solenoid not activated (with fail-safe function activated and engine not running): ABS solenoid and Rear inlet solenoid Approx. OV circuit Front left inlet Actuator is not activated and actuator relay is activated (with vehicle solenoid stopped and engine running): Battery voltage (Approx. 12V) ABS motor is running (in CONSULT active test mode): Battery voltage ABS motor monitor ABS motor monitor (Approx. 12V) circuit ABS motor is stopped (with ignition switch ON): Approx. OV ABS warning lamp ABS warning lamp ON'2: Approx. OV ABS warning lamp ABS warning lamp OFF'2: Battery voltage (Approx. 12V) and circuit Front right wheel sensor Wheels are turning (Approx. 30 krn/h)*3: Pulse generates. Wheel sensors Front: Approx. 200 Hz and circuit sensor Rear: Approx. 400 Hz Front right outlet Actuator is activated (in CONSULT active test mode), or actuator relay is Rear outlet sole- not activated (with fail-safe function activated and engine not running): ABS solenoid and Approx. OV circuit I lUlU / Actuator is not activated and actuator relay is activated (with vehicle Front left Outlet stopped and engine running): Battery voltage (Approx. 12V) solenoid '1:e to tooen a connector terminal when using a circuit tester for inspection. I '2: ABS warning lamp ON: When the ignition switch is turned ON (before starting the engine) or a malfunction is detected ABS warning lamp OFF: One second after the ignition switch is turned ON (with the system in normal condition) *3: Tire pressure must be in accordance with specification.

owners manual Nissan Skyline

owners manual Nissan Skyline - year of production: 1998, 1999, 2000, 2001, 2002 - Nissan Skyline R34 workshop service manual EN