or
owners manual VW CC
owners manual VW CC - year of production: 2012 - VW CC owners manual EN
Document:
pdf (6.78 MB) 429 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle VW CC, year of production 2012:
Please carry out each step only in the order specified:
5. At the garage door opener receiver (overhead unit) in the garage, locate the “learn” or
“training” button. The name and color of the button may vary by manufacturer. This button
is usually located near the hanging antenna wire attachment point on the unit. If you cannot
locate the “training” button, refer to the garage door opener’s user manual.
6. Press and release the “training” button.
Once the button is pressed, you have 30 seconds to initiate the next step.
7. Return to the vehicle. Firmly press and hold the programmed HomeLink button for
2 seconds and release.
8. Repeat the “press/hold/release” sequence up to 3 times to complete the programming
process for that button.
®
Repeat the steps to program the other buttons for the HomeLink Universal Transmitter on the sun
visor keypad to control other devices.
Deleting programming for all buttons
Be sure to delete programming on all buttons on the sun visor keypad before selling the vehicle or
turning it over to people you do not know.
x Complete the programming preparation steps described above.
x Press and hold buttons 1 and 3 at the same time, for about 20 seconds.
x When the indicator light above button 2 begins to flash, immediately release buttons 1 and 3.
This step deletes all old settings.
After programming
Test the garage door opener, Operating the HomeLink® Universal Transmitter.
®
Operating the HomeLink Universal Transmitter
¤ Please first read and note the introductory information and heed the WARNINGS
x The vehicle must be in operating range of the garage or outer gate drives.
x With ignition turned on or engine running, press the appropriate button on the sun viso⇒ r .
®
The range of the HomeLink Universal Transmitter roughly corresponds to the range of the original
remote control of the device or the electrical drive. If the garage door or the electrical drive does not
work, this could be for one of the following reasons:
Malfunction Possible cause Possible remedy
Distance or transmission Try different distances and angles to the
angle too great. receiver.
Garage door or electrical Garage door or electrical May not comply with legal requirements
drive does not work. drive not compatible. and may have to be replaced.
Incorrect programming. Reprogram the garage door opener.
Download PDF
Click here to download a pdf file with an instruction manual for VW CC
year of production from: 2012
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
VW CC owners manual
pages 80 - 86
VW CC owners manual
page 83 / 429
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF
Others owner's manuals for this model: