or
owners manual VW CC
owners manual VW CC - year of production: 2012 - VW CC owners manual EN
Document: pdf (6.78 MB) 429 pages
all ratings: 0 average rating: 5
text version of content this owner's manual page from owners manual to the vehicle VW CC, year of production 2012:
Fig. 37 To program: Simultaneously press the buttons for the HomeLink Universal Transmitter and the remote
control.
¤ Please first read and note the introductory information and heed the WARNINGS
Getting ready to program
¥ Please read the product manufacturer's instructionsbe fore programming the garage door opener
or other device.
¥ Safely park the vehicle within range of the device to be programmed.
¥ Switch the ignition on, but do not start the engine.
The buttons 1, 2, and 3 on the keypad in the sun visor can operate up to 3 separate devices (for
example, a gate and garage door, house alarm or lighting system).
Please carry out each step only in the order specified:
1. For first time programming only: Press and hold the 2 outer HomeLink buttons 1 and 3
at the same time for about 20 seconds, releasing only when the HomeLink indicator light
above button 2 begins to flash.
This step deletes any old settings. Do not perform this step when programming the
additional HomeLink buttons.
2. Position the hand-held transmitter for your remote control device 1–3 inches (25–75 mm)
away from the HomeLink keypad on the driver side sun visor, keeping the HomeLink
indicator light in view, as shown ⇒ fig. 36.
3. Using both hands, simultaneously press and hold both the HomeLink button you want to
program (1, 2, or 3) and the hand-held transmitter button, as shown ⇒ fig. 37. Do not
release the buttons until the HomeLink indicator light flashes slowly and then
rapidly. When the indicator light flashes rapidly, release both buttons. The rapid flashing
indicates successful programming.
4. Press and hold the programmed HomeLink button and watch the indicator light.
If the indicator light comes on and does not flash, programming is complete and your
garage door opener or other device should activate when the HomeLink button is pressed
and released.
If the indicator light blinks rapidly for 2 seconds and then stays on, proceed with the
following programming instructions for a rolling code device. A second person may make
the following steps quicker and easier. Please use a ladder or other device. Do not stand
on your vehicle to perform the next steps .
Download PDFClick here to download a pdf file with an instruction manual for VW CC
year of production from: 2012
Do you prefer pdf format?Find out how to download
Enter the code to download PDF file:
:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
VW CC owners manual
pages 79 - 85
pages 79 - 85
VW CC owners manual
page 82 / 429
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDFOthers owner's manuals for this model: