owners manual Seat Alhambra

all ratings: 0 average rating: 5

Operation them off again at speeds below approximate-●If the camera is damaged or if the power “Coming home” and “Leaving home” ly 30 km/h (18 mph). supply has been cut off function (guidance lights) ●In the event of fog, snow or heavy rain Switching on and off The “Coming home” function should be ●In the event of dust or sand storms switched on manually. However the “Leav- Action ●If the windscreen is damaged by the impact ing home” function is automatically control- from a stone in the camera's field of vision Switch-– With the ignition on, turn the lights controlled by a photo sensor. ing on:to the position  and put the turn signal● If the camera's field of vision is misted up, and main beam lever in the main beam posi- dirty or covered by a sticker, snow or ice.Coming home: necessary operations tion ››› page 76. When the headlight adjust- ment (automatic lights also) is activated, the – Switch off the ignition. WARNING warning lamp lights up in the dash panel – Briefly flash the headlights for ap- display . The greater comfort that the headlight ad-proximately one second ››› page 76. To switch sys-The “Coming home” lighting comes on justment provides (automatic also) must not Switch-– Disconnect the on button. tem on:when the driver door is opened. The cause you to take risks. The system is not a ing off:– OR: turn the lights control to a different po- delay in switching off the headlights is replacement for driver awareness. sition to  ››› page 75. counted from when the last door or – OR: place the turn signal and main beam● Always monitor the lights yourself and ad- boot hatch is closed. lever in the headlight flasher or main beam just them depending on the light, visibility position ››› page 76. and traffic conditions. – Automatically at the end of the delay period. ● The headlight adjustment (automatic also) The following conditions can cause the head- – Automatically, if 30 seconds after may not correctly detect all situations and in To switch sys-coming on, a vehicle door or the boot light adjustment to fail to turn off the main certain situations may only provide limited tem off:hatch remains open. beam or fail to do so in time: function. – When the light switch is turned to po- sition . ● If the windscreen is damaged or modifica- ●On roads with insufficient lighting with very – When the ignition is switched on. tions are made to the vehicle lighting, this reflective signs may harm the functioning of the headlight ●If road users are insufficiently lit up, e.g. adjustment (automatic lights also), for exam- Leaving home: necessary operations pedestrians or cyclists. ple, if additional headlight are fitted. – Unlock the vehicle when the light ●On closed curves, when the traffic in the To switch sys- switch is in position  and the pho- opposite direction is partially hidden, on pro- tem on: Note to sensor detects darkness. nounced slopes Main beam and flashed headlights can be ●On roads with traffic in the opposite direc- turned on and off manually at any time with tion and with a central reservation barrier the turn signal and main beam lever where the driver can see through gaps or ››› page 76. over it e.g. lorry drivers. 78

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders