Audi A4 B8 owners manual page 78

text version of content this owner's manual page from owners manual to the vehicle Audi A4, year of production 2008 - 2015:

document_0900452a81b1b9de.book Seite 76 Donnerstag, 26. Juli 2007 9:16 09 76 Seats and storage Storing and recalling settings – If the driver's door is closed, press and hold down the You can store and recall the settings for two different drivers using desired recall button until the programmed settings are the recall buttons 1 and 2 ⇒ page 75, fig. 77 ⇒ page 76. reached. In addition, the current settings are automatically stored when you A tone will sound and the diode in the SET button ⇒ page 75, lock the vehicle and assigned to the remote control key that is being fig. 77 will light up to confirm that the settings have been stored. used. When you unlock the vehicle, the system automatically recalls the settings stored on that remote control key. When you lock the vehicle the current settings are automatically stored and assigned to the remote control key. However, the Switching seat memory on and off settings assigned to the remote control key will not overwrite the The seat memory will be out of action if the OFF switch has been settings stored on recall buttons 1 and 2. The settings stored on the pressed and the diode in the switch is lit. In this case, the setting recall buttons can be called up at any time. When you unlock the cannot be stored. vehicle, the settings assigned to the remote control key are recalled The stored settings will all remain in the memory. However, the seat automatically. can now only be adjusted using the conventional electrical If your vehicle is also driven by other persons using your remote adjustment. control key, it is advisable to store your personal settings on one of the recall buttons. You can then re call your own settings at any time simply by pressing the corresponding recall button. When you lock Applies to vehicles: with seat memory the vehicle these settings are then stored automatically and Storing and recalling settings assigned once again to the remote control key. Storing settings WARNING – Adjust the driver's seat as required. • For safety reasons, never recall seat settings when the vehicle – Adjust both exterior mirrors. is moving - this could lead to an accident. – Press the SET button. The diode in the switch will light • In an emergency the recall function can be stopped at any time up to indicate that it is ready to store the settings. Now by pressing the ON/OFF switch, or by briefly pressing any of the press the desired recall button for at least a second. recall buttons. – Release the button. The setting is now stored on the selected recall button. Recalling settings – If the driver's door is open, press the desired recall button briefly.

owners manual Audi A4

owners manual Audi A4 - year of production: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 - Audi A4 B8 owners manual EN