owners manual Mercedes CL

owners manual Mercedes CL - year of production: 2006 - Mercedes Benz CL C216 owners manual EN

Document: pdf (20.48 MB) 723 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mercedes CL, year of production 2006:

Technical data Fuels, coolants, lubricants, etc. Coolants The coolant solution must be used year To provide important corrosion protection, round to provide the necessary corrosion the solution must be at least 50% anticor- The engine coolant is a mixture of water protection and increase boil-over protec-rosion/antifreeze (equivalent to freeze and anticorrosion/antifreeze, which pro-tion. Refer to Maintenance Booklet for re-protection to approximately -35°F vides: placement interval. [-37°C]). If you use a solution that is more Corrosion protection Coolant system design and coolant used than 55% anticorrosion/antifreeze (freeze determine the replacement interval. The protection to approximately -49°F Freeze protection replacement interval published in the [-45°C]), the engine temperature will in- Boiling protection (by increasing the Maintenance Booklet is only applicable if crease due to the lower heat transfer capa- boiling point) MB325.0 Anticorrosion/Antifreeze solu-bility of the solution. Therefore, do not use The cooling system was filled at the factory tion or other Mercedes-Benz approved more than this amount of anticorrosion/ with a coolant providing freeze protection products of equal specification are used to antifreeze. to approximately -35°F (-37°C) and corro-renew the coolant concentration or bring it If the coolant level is low, water and sion protection. back up to the proper level.MB325.0 Anticorrosion/Antifreeze For information on other Mercedes-Benz should be used to bring it up to the proper !Add premixed coolant solution only. Adding level (have cooling system checked for water and MB 325.0 Anticorrosion/Antifreeze approved products of equal specification, signs of leakage). separately from each other, could cause engine refer to the Factory Approved Service damage not covered by the Mercedes-Benz Lim-Products pamphlet (USA only) or contact The water in the cooling system must meet ited Warranty. an authorized Mercedes-Benz Center.minimum requirements, which are usually If the antifreeze mixture is effective to satisfied by normal drinking water. If you -35°F (-37°C), the boiling point of the cool- are not sure about the water quality, con- ant in the pressurized cooling system is sult an authorized Mercedes-Benz Center. reached at approximately 266°F (130°C). 689

Download PDF

Click here to download a pdf file with an instruction manual for Mercedes CL
year of production from: 2006

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.