owners manual Seat Arona

all ratings: 0 average rating: 5

The essentials the wheel condition and hub mounting surfa- with care as this means the tyre does not of- ● Loosen the wheel bolts only about one turn e These surfaces must be clean before fit- fer optimum driving properties. This is of par- c s. before raising the vehicle with the jack. ting the wheel. ticular importance when the road surface is ● Never apply grease or oil to wheel bolts or wet. to the wheel hub threads. Even if the bolts Wheel bolt tightening torque have been tightened to the prescribed tor- To return to directional tread tires, replace que, they could come loose while driving. The prescribed tightening torque for wheel the punctured tyre as soon as possible and bolts for steel and alloy wheels is 140 Nm.● Never loosen the screwed joints of wheel restore the obligatory direction of rotation of After changing a wheel, have the tighteningrims with bolted ring trims. all tyres. torque checked immediately with a torque● If wheel bolts are tightened below the pre- wrench that is working perfectly.scribed torque, the bolts and rims could come loose while driving. If tightening torque is too Subsequent work Before checking tightening torque, have any high, the wheel bolts or threads can be dam- rusty wheel bolts that are difficult to screw re- aged. ●Alloy wheels: replace the wheel bolt caps. placed and clean the wheel hub threads. ●Plate wheels: replace the wheel hubcap. Never apply grease or oil to wheel bolts or to CAUTION ●Return all tools to their proper storing loca- the wheel hub threads. Even if the bolts have When removing/fitting the wheel, the rim tion. been tightened to the prescribed torque, they may hit and damage the brake disc. For this could come loose while driving. ● If the replaced wheel does not fit in the reason, please take care and get a second spare wheel housing, store it safely in the person to assist you. WARNING luggage compartment ››› page 152.  If the wheel bolts are not properly tightened, ●Check the tyre pressure of the newly moun- they could come loose while driving and ted tyre as soon as possible. Tyres with compulsory rotation direc- cause an accident, serious injury and loss of ●In vehicles fitted with a tyre pressure indi- tion vehicle control. cator, adjust the pressure and store it in ● Use only wheel bolts which correspond to memory ››› page 282. A directional tread pattern can be identified the rim in question. by the arrows on the sidewall that point in● Have the tightening torque of the wheel ● Never use different wheel bolts. the direction of rotation. Always observe the bolts checked as soon as possible with a tor- ● Wheel bolts and threads should be clean, direction of rotation indicated when fitting que wrench (it should be 120 Nm). Mean- free of oil and grease, and it should be possi- the wheel to guarantee optimum properties while, drive carefully. ble to screw them easily. of this type of tyres with regard to grip, ●Have the flat tyre replaced as quickly as ● To loosen and tighten wheel bolts, only usenoises, wear and aquaplaning. possible. the wheel wrench that came with the car from If it is absolutely necessary to fit the spare the factory. tyre* against the direction of rotation, drive 65

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders