BMW X6 M Power F16 owners manual page 67

text version of content this owner's manual page from owners manual to the vehicle BMW X6M F16, year of production 2014:

Seite 67 Driving Controls Under normal operating conditions, fuel conѪ Washer fluid reservoir sumption is lowest when you are driving in poѪ Adding washer fluid sition D. Only add washer fluid when the engine is cool, and then close the cover completely to Kickdown avoid contact between the washer fluid and Kickdown is used to achieve maximum driving hot engine parts. performance. Press on the accelerator beyond Otherwise, there is the danger of fire and a risk the resistance point at the full throttle position. to personal safety if the fluid is spilled.◀ R is Reverse Select only when the vehicle is stationary. N is Neutral The vehicle can roll. N remains engaged after the engine is switched off if the remote control remains in the ignition lock. This function can be used in an automatic car wash, refer to page 291, for All washer nozzles are supplied from one resѪexample. P is automatically engaged after apѪ ervoir. prox. 30 minutes. The recommended minimum filling quantity is P Park 0.2 US gal/1 liter. The drive wheels are blocked. Fill with a mixture of window washing concenѪ trate and tap water; if needed, add antifreezeP is engaged automatically when the following according to the manufacturer instructions.conditions are met: Mix the washer fluid before adding to maintain▷ The driver's door is opened while the enѪ the correct mixing ratio. gine is running, the safety belt is not fasѪ tened and neither the brake pedal nor the Do not fill in undiluted window washing conѪ accelerator is activated. centrate and antifreeze and do not fill in pure water; this could damage the washer system.▷ The engine is switched off unless N is enѪ gaged and the remote control is in the igniѪ Do not mix window washing concentrate from tion lock. different manufacturers; this could cause the washer nozzles to clog. ▷ The remote control is removed from the igѪ nition lock. Before leaving the vehicle, ensure that the Automatic transmission with transmission position P is engaged; otherwise, the vehicle may begin to roll. Steptronic Transmission positions Engaging transmission position ▷ Transmission position P can only be disenѪ D Drive, automatic position gaged if the engine is running and the brake pedal is pressed. Position for normal vehicle operation. All forѪ ward gears are available. 67 Online Edition for Part no. 01 40 2 910 899 - VII/13

owners manual BMW X6M F16

owners manual BMW X6M F16 - year of production: 2014 - BMW X6 M Power F16 owners manual EN