or
owners manual Jeep Grand Cherokee
owners manual Jeep Grand Cherokee - year of production: 2013 - Jeep Grand Cherokee WK2 WH2 owners manual EN
Document:
pdf (3.08 MB) 472 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Jeep Grand Cherokee, year of production 2013:
Installing A Child Restraint With A5. To lock the seat belt, pull down on theAny seat belt system will loosen with time, so
Switchable Automatic Locking Retractorshoulderpartofthebeltuntilyouhavepulledcheck the belt occasionally, and pull it tight if
(ALR): all the seat belt webbing out of the retractor.necessary.
1. Place the child seat in the center of theThen, allow the webbing to retract back intoTransporting Pets
seating position. For some second rowthe retractor. As the webbing retracts, youAir Bags deploying in the front seat could harm
seats, you may need to recline the seatwill hear a clicking sound. This means theyour pet. An unrestrained pet will be thrown
and/or raise the head restraint to get a betterseat belt is now in the Automatic Lockingabout and possibly injured, or injure a passen-
fit. If the rear seat can be moved forward andmode. ger during panic braking or in a collision.
rearward in the vehicle, you may wish to6. Try to pull the webbing out of the retractor. IfPets should be restrained in the rear seat in pet
move it to its rear-most position to makeit is locked, you should not be able to pull outharnesses or pet carriers that are secured by
room for the child seat. You may also moveany webbing. If the retractor is not locked,seat belts.
the front seat forward to allow more room forrepeat step 5.
the child seat. ENGINE BREAK-IN
7. Finally, pull up on any excess webbing toRECOMMENDATIONS
2. Pull enough of the seat belt webbing fromtighten the lap portion around the child re-
the retractor to pass it through the belt pathstraint while you push the child restraintA long break-in period is not required for the
of the child restraint. Do not twist the beltrearward and downward into the vehicledrivetrain (engine, transmission, clutch, and
webbing in the belt path. seat. rear axle) in your new vehicle.
3. Slide the latch plate into the buckle until you8. Test that the child restraint is installed tightlyDrive moderately during the first 300 mi
hear a “click.” (500 km). After the initial 60 mi (100 km),
by pulling back and forth on the child seat atspeeds up to 50 or 55 mph (80 or 90 km/h) are
4. Pull on the webbing to make the lap portionthe belt path. It should not move more thandesirable.
tight against the child seat.25 mm in any direction. While cruising, brief full-throttle acceleration
within the limits of local traffic laws contributes
60
Download PDF
Click here to download a pdf file with an instruction manual for Jeep Grand Cherokee
year of production from: 2013
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Jeep Grand Cherokee WK2 WH2 owners manual
pages 61 - 67
Jeep Grand Cherokee WK2 WH2 owners manual
page 64 / 472
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF