owners manual Jeep Grand Cherokee

all ratings: 0 average rating: 5

Always follow the directions of the childget a better fit. If the rear seat can be movedthe belt path. It should not move more than restraint manufacturer when installing yourforward and rearward in the vehicle, you25 mm in any direction. child restraint. Not all child restraint sys-maywishtomoveittoits rear-most position tems will be installed as described here.to make room for the child seat. You mayWARNING! When using a Universal ISOFIX child re-also move the front seat forward to allow straint system, you can only use approvedmore room for the child seat.•Improper installation of a child restraint to child restraint systems with the marking the ISOFIX anchorages can lead to failure ECE R44 (release R44/03 or superior) “Uni-3. Attach the connectors of the child restraint toof the restraint. The child could be badly versal ISOFIX”. the lower anchoragesintheselectedseatinginjured or killed. Follow the child restraint To Install An ISOFIX Child Restraint:position.manufacturers directions exactly when in- If the selected seating position has a Switchable4. If the child restraint has a tether strap, con-stalling an infant or child restraint. Automatic Locking Retractor (ALR) seat belt,nect it to the top tether anchorage. See the•Childrestraint anchorages are designed to stow the seat belt, following the instructionssection “Installing Child Restraints Using thewithstand only those loads imposed by below. See the section “Installing Child Re- correctly-fitted child restraints. Under no straints Using the Vehicle Seat Belt” to checkTop Tether Anchorage” for directions to at-circumstances are they to be used for whattypeofseatbelteachseatingpositionhas.tach a tether anchor.adult seat belts, harnesses, or for attach- 1. Loosen the adjusters on the lower connec-5. Tightenallofthestrapsasyoupushthechilding other items or equipment to the ve- tors and on the tether strap of the child seatrestraint rearward and downward into thehicle. so that you can more easily attach theseat. Remove slack in the straps according•Install the child restraint system when the connectors to the vehicle anchorages.to the child restraint manufacturers instruc-vehicle is stationary. The ISOFIX child 2. Place the child seat between the lower an-tions.restraint system is correctly fixed to the chorages for that seating position. For some6. Test that the child restraint is installed tightlybrackets when you hear the click. second row seats, you may need to reclineby pulling back and forth on the child seat at the seat and / or raise the head restraint to 57

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders