owners manual Mercedes C

owners manual Mercedes C - year of production: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 - Mercedes Benz C Class W202 owners manual EN

Document: pdf (2.54 MB) 130 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mercedes C, year of production 1993 - 2001:

Garage Door Opener 1. Integrated remote control transmitter 2. Portable remote control transmitter Warning ! When programming a garage door opener, the door moves up or down. When programming or operating the remote control make sure there is no possibility of anyone being harmed by the moving door. The built-in remote control is capable of operating up to three separately controlled objects. Notes: Certain types of garage door openers are incompatible with the integrated opener. If you should experience difficulties with programming the transmitter, contact your authorized Mercedes-Benz dealer or call Mercedes-Benz Customer Assistance Center (in the U.S.A. only) at 1-800-FOR-MERCedes. For operation in the USA only: This devise complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modification to this device could void the user's authority to operate the equipment. Programming or reprogramming the integrated remote control: 1. Turn electronic key in steering lock to position 1 or 2. 2. Press and hold one button of the integrated remote control located on the sun visor until its control light begins to flash at a rate of about once a second. Continue holding down the button. Note: The light blinks immedi ately if the integrated remote control is being programmed for the first time, or if its memory was previously erased. If you are reprogramming a previously used button, the light will flash after about 20 seconds. 3. Aim portable remote control transmitter at the integrated rem ote control transmitter to be programmed. While still holding down the button on the transmitter on the inside rear view mirror, press down the button on you r portable remote control transmitter, until the integrated remote c ontrol light starts to flash rapidly. This means that the integrated transmitter has accepted the frequency and code of the portable transmitter. 4. If you wish, repeat the procedure for each remaining button. Note: If the garage door opener is equipped with the "rolling code feature", it needs to be trained to a ccept the remote control command. To do so, the assistance of a second person is required. 1. Locate training button (p art of the opener unit in the garage). 2. Press and hold training button until training light next to the button begins to flash (in two seconds). 3. Now have the second person press and hold the previously programmed button on the integrated remote control transmitter until the training light on the garage door opener is lit continuously (in two seconds). 4. Release and press the programmed button on the integrated remote control transmitter once again to turn off the training light in the garage door opener. 5. Confirm the garage door operation by pressing the programmed button on the integrated remote control transmitter.

Download PDF

Click here to download a pdf file with an instruction manual for Mercedes C
year of production from: 1993

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.