text version of content this owner's manual page
from owners manual to the vehicle Fiat Tipo, year of production 2015:
40) 41) 42) 43) 44) 45) 46) 47) 48) 49) with a gradient higher than 5%, engine
TC(Traction Control) PBA(PanicBrake running, brake pressed and
SYSTEM Assist) SYSTEM transmission in neutral or gear other
SAFETYThe system automatically operates in The PBA system is designed to improve than reverse engaged;
the event of slipping, loss of grip on wet the vehicle’s braking capacity during downhill: vehicle stationary on a road
roads (aquaplaning) and acceleration on emergency braking. with a gradient higher than 5%, engine
slippery, snowy or icy roads, etc. on The system detects emergency braking running, brake pressed and reverse
one or more drive wheels. Depending by monitoring the speed and force with gear engaged.
on the slipping conditions, two different which the brake pedal is pressed, and Whensetting off, the ESC system
control systems are activated: consequently applies the optimal brake control unit maintains the braking
if the slipping involves both drive pressure. This can reduce the braking pressure on the wheels until the engine
wheels, the system intervenes, reducing distance: the PBA system therefore torque necessary for starting is
the power transmitted by the engine; completes the ABS. reached, or in any case for a maximum
if the slipping only involves one of the Maximumassistance from the PBA of 2 seconds, allowing your right foot to
drive wheels, the BLD (Brake Limited system is obtained by pressing the be moved easily from the brake pedal
Differential) function is activated, brake pedal very quickly. In addition, the to the accelerator.
automatically braking the wheel which brake pedal should be pressed Whentwosecondshaveelapsed,
is slipping (the behaviour of a continuously during braking, avoiding without starting, the system is
self-locking differential is simulated). intermittent presses, to get the most automatically deactivated, gradually
This will increase the engine torque out of the system. Do not reduce releasing the braking pressure. During
transferred to the wheel which isn't pressure on the brake pedal until this release stage it is possible to hear a
slipping. This function remains active braking is no longer necessary. typical mechanical brake release noise,
even if the "Systems partially disabled" The PBA system is deactivated when indicating the imminent movement of
and "Systems disabled" modes are the brake pedal is released. the car.
selected (see description in the
following pages). 53) 54)
50) 51) 52)
Systemintervention HHC(Hill Hold Control) ERM(Electronic Rollover
SYSTEM Mitigation) SYSTEM
The intervention of the system is The system monitors the tendency of
indicated by the flashing of the This is an integral part of the ESC the wheels to rise from the ground if the
warning light on the instrument system and facilitates starting on driver performs extreme manoeuvres
panel, to inform the driver that the slopes, activating automatically in the like quick steering to avoid an obstacle,
vehicle is in critical stability and grip following cases: especially in poor road conditions.
conditions. uphill: vehicle stationary on a road
58
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser