owners manual VW Touareg

owners manual VW Touareg - year of production: 2010 - VW Touareg II 2 owners manual EN

Document: pdf (9.85 MB) 620 pages

all ratings: 1 average rating: 3

text version of content this owner's manual page from owners manual to the vehicle VW Touareg, year of production 2010:

2. Turn the ignition of the vehicle with the dead battery. If the engine starts, wait 2 to 3 minutes until it “runs smoothly” before removing the jumper cables as described below ⇒ . If the engine does not start within about 10 seconds, turn off the ignition and wait at least 1 minute; then try again. Before removing the jumper cables 1. Switch off the headlights (if they are on). 2. In the vehicle with the dead battery, switch on the heater fan and the rear window defroster. This helps tit minimize voltage spikes when the cables are disconnected. Removing the jumper cables 1. Before you remove the jumper cables, switch off the headlights (if they are on). 2. In the vehicle with the dead battery, switch on the heater fan and the rear window defroster. This helps to minimize voltage spikes when the jumper cables are disconnected. 3. With the engine running, remove the jumper cables in reverse order to the way they were connected. Specifically: – Disconnect the black (–) cable from the vehicle with the dead battery. – Disconnect the black (–) cable from the other vehicle (vehicle with the good battery). – Disconnect the red (+) cable from the other vehicle (vehicle with the good battery). – Disconnect the red (+) cable from the vehicle with the dead battery. 4. Turn off the heater fan and the rear winder defroster on the vehicle with the dead battery. 5. Snap the cap of the positive jump start terminal back on, reinstall covers, and close engine hoods.

Download PDF

Click here to download a pdf file with an instruction manual for VW Touareg
year of production from: 2010

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.