VW Touareg II 2 owners manual page 559

text version of content this owner's manual page from owners manual to the vehicle VW Touareg, year of production 2010:

x Unscrew the valve core from the tire valve using the valve core wrench⇒ fig. 326 (1) and place it on a clean surface. x Vigorously shake the tire inflation cylinde⇒r fig. 326 (10) a few times back and forth. x Tightly screw the filling hose⇒ fig. 326 (3) to the tire inflation bottle (turn clockwise). The foil on the seal is automatically pierced. x Remove the sealing plug from the filling hose⇒ fig. 326 (3) and slide the open end onto the tire valve. x Hold the cylinder with the bottom pointing up and fill theen tire contents of the tire inflation cylinder into the tire. x Detach the empty tire inflation cylinder from the valve. x Using the valve core wrench⇒ fig. 326 (1) screw the valve core back into the tire valve. Inflating the tire x Screw the tire inflation hose⇒ fig. 326 (5) of the air compressor tightly to the tire valve. x Check whether the air release valve⇒ fig. 326 (7) is screwed on tightly. x Open the engine hood⇒ Working in the engine compartment. x Attach the cable clips⇒ fig. 326 (9) only to the jump-start terminals in the engine compartment ⇒ fig. 327. The red clip on the compressor cable is connected to the positive (+) terminal; the black clip is connected to the negative terminal (—). x Start the vehicle engine and let it run. x Switch the air compressor on using the ON / OFF switch⇒ fig. 326 (8), x Let the air compressor run until a pressure of 36 – 44 psi (250 - 300 kPa) is reached⇒ . Maximum run time 8 minutes ⇒ . x Switch off the air compressor. x If an air pressure of 36 – 44 psi (250 - 300 kPacan) not be reached, unscrew the tire inflation hose from the tire valve. x Drive about 30 feet (10 meters) backwards or forwards so that the sealant can be distributed inside the tire. x Connect the tire inflation hose of the air compressor again to the tire valve and repeat the flaintion process. x If the required tire pressure still cannot be reached, the tire is too badly damaged. The tire canno t be sealed using the tire mobility set. Do not drive the vehicle. Get professional assistance ⇒ . x Disconnect the air compressor and unscrew the tire inflation hose from the tire valve. x If a tire pressure of 36 – 44 psi (250 – 300 kPa) is reached, continue driving right away and drive at a speed of not more than 50 mph (80 km/h). x Check tire pressure afte10r minutes of driving ⇒ Check after 10 minutes of driving. WARNING The tire inflation hose and air compressor can get hot during inflation. x Protect hands and skin from hot parts. x Do not place the hot tire inflation hose or hot air compressor on flammable material. x Let the equipment cool off almost completely before stowing it. x If the tire cannot be inflated to at least 36 psi (250 kPa), the damage is too greatot be repaired with the tire mobility set. The sealant is not able to seal the tire. Do not drive the vehicle. Get professional assistance.

owners manual VW Touareg

owners manual VW Touareg - year of production: 2010 - VW Touareg II 2 owners manual EN