owners manual Chrysler 300C

all ratings: 0 average rating: 5

MAINTAINING YOUR VEHICLE 545 5. Pull the tail lamp assembly away from the vehicle CAUTION! enough to access the electrical connector. Do not touch the new bulb with your fingers. Oil6. Push the electrical connector locking tab to the side. contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the7. Disconnect the electrical connector. bulb with rubbing alcohol. 8. Continue removing lamp from vehicle in order to Rear Backup Lamp And Turn Signal Lampsaccess the bulb(s). 1. Open the trunk. 9. Turn the appropriate bulb and socket assembly coun- terclockwise to remove it from the tail lamp assembly. 2. Remove the trunk trim by removing the grocery hook10. Disconnect the bulb from the socket assembly and (using a T-20 torque driver or similar tool), remove theinstall the replacement bulb. fastener, and pull back the weather strip. 7 3. Pull back the trunk liner to gain access to the tail lamp11. Reinstall the bulb and socket assembly into the tail wing nuts. lamp assembly, and then turn it clockwise. 4. Remove the three wing nuts from the back of the tail12. Reinstall the tail lamp assembly, fasteners, electrical lamp assembly. connector, and trunk trim. 13. Close the trunk.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders