owners manual Mercedes E

all ratings: 0 average rating: 5

212_AKB; 2; 41, en-US 2009-07-17T09:14:21+02:00 - Seite 52 d2ureepe, Version: 2.11.8.1 52 Occupant safety sounds with increasing intensity for a maximum of 60 seconds or until the driver’s and front passenger’s seat belt are fastened. If you and/or your passenger release the seat belt during driving, the seat belt telltale 7 starts flashing and the warning chime sounds as described before. If the driver’s or the front passenger’s seat belt remains unfastened after 60 seconds, the warning chime stops sounding, the seat XRaising: Slide the seat belt outlet height belt telltale 7 stops flashing but adjuster upward. continues to be illuminated. The seat belt outlet height adjuster After a vehicle standstill, the warning chime Safety and securityengages in different positions. is reactivated and the seat belt telltale XLowering: Press and hold release 7 is flashing again if the vehicle speed button :. once exceeds 15 mph (25 km/h). XSlide the seat belt outlet height adjuster The seat belt telltale 7 will only go out if downward. both the driver’s and the front passenger’s XRelease release button : and make sureseat belt (with the front passenger seat occupied) are fastened, or the vehicle is the seat belt outlet height adjuster engages standing still and a front door is opened. into place. For more information, see “Practical hints” (Y page 307). Enhanced seat belt reminder system When the engine is started, the seat belt Emergency Tensioning Device (ETD), telltale 7 will always illuminate for seat belt force limiter 6 seconds to remind you and your passengers The seat belts for the front seats and rear to fasten your seat belts. outer seats are equipped with ETDs and seat If the driver’s seat belt is not fastened when belt force limiters. the engine is started, an additional warning The ETDs are designed to activate in the chime will sound. The warning chime goes out following cases: after approximately 6 seconds or once the driver’s seat belt is fastened. R in frontal or rear-end impacts exceeding If after these 6 seconds the driver’s or thethe system’s preset deployment threshold front passenger’s seat belt (with the front R in side impacts exceeding the system’s passenger seat occupied) is not fastened with preset deployment threshold on the far front doors closed, side of the impact R the seat belt telltale 7 remains R in certain vehicle rollovers illuminated for as long as either the driver’s R if the restraint systems are operational and or front passenger’s seat belt is not functioning correctly, see “SRS indicator fastened. lamp” (Y page 36) R and if the vehicle speed once exceeds The ETDs for the front seats will only activate 15 mph (25 km/h), the seat belt telltale if the front seat belts are fastened (latch plate 7 starts flashing and a warning chime properly inserted into buckle).

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders